Wire is supplied to the condition the downstream process needs — soft annealed for forming, hard drawn for springs, and to weld-grade cleanliness where it feeds a welding process.
Wire is supplied to the condition the downstream process needs — soft annealed for forming, hard drawn for springs, and to weld-grade cleanliness where it feeds a welding process. Rajgranth Metal & Alloys has been trading since 1980, is self-funded and debt-free, and despatches most orders from its Mumbai stockyard within two days.
Stainless wire for spring, weld, rope, mesh, forming and cold-heading applications. We manufacture, stock, supply and export stainless Steel Wires from Mumbai, Maharashtra, in 6 grades, so most requirements can be met from held stock instead of waiting on a mill.
Our published range covers diameter 0.10 mm, 12 mm, condition Soft annealed, Half hard, Hard drawn, Bright and form Coil, Spool, Straightened and cut. Sizes outside the stocked range can be produced to order; send the dimensions with your enquiry.
Stainless Steel Wires are available in 304 / 304L, 316 / 316L, 321 / 321H, 347 / 347H, Duplex / Super Duplex and 17-4 PH. Each grade has its own page with composition, designations, mechanical properties and the sizes we hold.
Material is supplied to ASTM A580, ASTM A313, ASTM A493 and EN 10088-3. Finishes and conditions include Bright, Matt and Annealed and pickled. HSN code 7223.
Stainless Steel Wires from Rajgranth are used in springs, welding wire, wire rope, wire mesh, cold heading and fasteners. We supply across India and export to markets in the Middle East, Africa, Europe, Asia, North America and South America.
Material is supplied with documentation, tested in house across 18 listed testing facilities, and covered by our ISO 9001:2015 quality management system. Rajgranth Metal & Alloys has been trading since 1980, is self-funded and debt-free, and despatches most orders from its Mumbai stockyard within two days.
Each grade page carries its own composition, corrosion behaviour, standards cross-reference and limitations.
The default austenitic stainless. 18% chromium, 8% nickel, no molybdenum.
304 plus 2–3% molybdenum. The standard answer to chlorides and mild acids.
304 stabilised with titanium. Resists sensitisation in the 425–815 degrees C range.
Stabilised with niobium rather than titanium. Preferred where weld filler purity matters.
Roughly equal austenite and ferrite. Around twice the yield strength of 316L.
Martensitic PH grade. Machine soft, then age to tensile strengths above 1300 MPa.
The full detail for this product as supplied from our Mumbai stockyard: sizes, grades, standards, tolerances, tests and applications.
Leading Stainless Steel Wires Manufacturer, Stockholder & Supplier in Mumbai, India. Our SS wires have diametres ranging from 3.175 mm to 101.6 mm and thicknesses from 0.5 mm to 3 mm to accommodate various applications, while lengths extend up to 30 metres, depending on size requirements. Surface finishes, including bright annealed (CFA), solution annealed (CFD), and polished (APP), ensure exceptional quality and aesthetic appeal. Whether it's for industrial machinery or household appliances, stainless steel wires deliver unmatched strength, corrosion resistance, and longevity, making them indispensable across diverse sectors. Trust in stainless steel wires for superior performance and longevity in your applications.
Get A Quote NOW
| Stainless Steel Wires | 2 | 1 |
|---|---|---|
| Product | Stainless Steel Wires | |
| SS Grade | 201, 202, J3, 303, 304, 304L, 304LN, 304H, 309, 310, 316, 316L, 316LN, 316H, 316TI, 317, 317L, 317LN, 321, 321H, 347, 347H, 904, 904L, duplex & super duplex SA240 UNS NO. S31803 , S32205 , S32550 , S32750 , S32760, SMO 254, 17-4PH, Alloy 20, and more grade as per requirment. | |
| Specifications | ASTM, A 269, A 312, A 789, A 213, A 790 ASME SA 213 / SA 269 / SA 789 / SA 790SB 163 / SA 312 / SB 165 / SB 423/ SB 444 / SB 729 / SB 829/EN 10216-5 / EN 10297-2 / DIN 2391 | |
| Diameter | 3.175 mm to 101.6 mm | |
| Thickness | 0.5 mm to 3 mm | |
| Length | Up to 30 Meters (Depending Upon Size) | |
| Surface Finish | Bright Annealed (CFA), Solution Annealed (CFD), Polished (APP) | |
| Application | Automotive Products, Balls & Taper Roller Bearings, Braiding Hoses, Brushes, Chains, Conveyor Belts, Filters, Free Cutting Wires, Fasteners, Nails, Flexible Connectors, Kitchen Ware and Gadgets, MIG & TIG, Welding, Needles, Shots, Pins, Sieves, Spokes, Springs, Surgical Equipments, Screens, Scrubber/Scouring Pads,Steel Wool, Utensils, Woven & Knitted Wire Cloth, Wall Ties & Tying Wire, Wire Ropes, Welding Electrodes, Filters, Hinges and Handles etc. |
6.35, 7.93, 9.52, 12.70, 15.87, 19.05, 22.22, 25.40, 31.750, 38.10, 44.45, 50.80, 63.50, 76.20, 88.90, 101.60 127.00, 139.70, 152.40, 165.10
1/4" , 5/16”, 3/8”, 1/2", 5/8”, 3/4”, 7/8”, 1”, 1 ¼”, 1 ½”, 1 ¾” , 2” 2 ½”, 3”, 3 ½”, 4”, 5”, 5 ½”, 6”, 6 ½”
0.71, 0.91, 1.21, 1.62, 2.03, 2.64, 2.94, 3.25, 0.65, 0.049, 0.039
0.065, 0.049, 0.039
22, 20, 18, 16, 14, 12, 11, 10
5 meter to 6.5 meters
As per Client Requirement upto 12 meters.
Annealed and Pickled (AP), Mirror Polish, Bright Annealed (BA), Matt Polish, Cold Drawn.
Stainless Steel Wires prices will vary depend upon specification and quantity required. Please reach to our sales team.
ASTM/ASME Standards: ASTM A213/ASME SA-213, ASTM A312/ASME SA-312, ASTM A376/ASME SA-376, ASTM A789/ASME SA-789, ASTM A790/ASME SA-790, ASTM A268/ASME SA-268, ASTM A269, ASTM A511, ASTM B729, ASTM B163/ASME SB-163, ASTM B407/ASME SB-407, ASTM B423/ASME SB-423, ASTM B444/ASME SB-444.
German Standards : DIN 17455, DIN 17456, DIN 17457, DIN 17458,DIN 17459, DIN 28180
NF Standards (AFNOR Standard) :NF A 49-117, NF A 49-217, NF A 49-317
JIS Standards : JIS G 3459, JIS G 3463
European Standard :EN 10216-5
Variable as per Sizes available in PSI / Bar.
Size, Grade / material, Specification, Heat number.
Hsn Code of Stainless Steel Wires is 7304 (first four digits).
Plain Ends, Beveled Ends.
| Stainless Steel Wires Dimension – (S.S. Wires) | 13 | 1 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wall thickness in mm. | 0.5 | 0.6 | 0.7 | 0.8 | 1 | 1.2 | 1.6 | 2 | 2.6 | 3 | 3.2 | 3.6 |
| O.D. in mm. | Weight in kg/meter | 12 | 1 | |||||||||
| 6 | 0.069 | 0.081 | 0.093 | 0.104 | 0.125 | 0.144 | 0.176 | – | – | – | – | – |
| 9.52 | 0.112 | 0.134 | 0.154 | 0.174 | 0.213 | 0.249 | 0.317 | – | – | – | – | – |
| 10 | 0.119 | 0.141 | 0.163 | 0.184 | 0.225 | 0.264 | 0.336 | – | – | – | – | – |
| 12.7 | 0.153 | 0.182 | 0.21 | 0.238 | 0.293 | 0.345 | 0.444 | – | – | – | – | – |
| 14 | 0.169 | 0.201 | 0.233 | 0.264 | 0.325 | 0.384 | 0.496 | – | – | – | – | – |
| 15.87 | 0.192 | 0.229 | 0.266 | 0.301 | 0.372 | 0.44 | 0.571 | 0.694 | – | – | – | – |
| 19 | 0.231 | 0.276 | 0.32 | 0.364 | 0.45 | 0.534 | 0.696 | 0.85 | 1.066 | 1.2 | 1.264 | – |
| 25 | 0.306 | 0.366 | 0.425 | 0.484 | 0.6 | 0.714 | 0.936 | 1.15 | 1.456 | 1.65 | 1.744 | 1.926 |
| 25.4 | 0.311 | 0.372 | 0.432 | 0.492 | 0.61 | 0.726 | 0.952 | 1.17 | 1.482 | 1.68 | 1.776 | 1.962 |
| 31.8 | – | – | – | – | – | 0.918 | 1.208 | 1.49 | 1.898 | 2.16 | 2.288 | 2.538 |
| 38 | – | – | – | – | – | 1.104 | 1.456 | 1.8 | 2.301 | 2.625 | 2.784 | 3.096 |
| 44.5 | – | – | – | – | – | 1.299 | 1.716 | 2.125 | 2.724 | 3.113 | 3.304 | 3.681 |
| 50.8 | – | – | – | – | – | 1.488 | 1.968 | 2.44 | 3.133 | 3.585 | 3.808 | 4.248 |
| 63.5 | – | – | – | – | – | – | 2.476 | 3.075 | 3.959 | 4.538 | 4.824 | 5.391 |
| 76.1 | – | – | – | – | – | – | 2.98 | 3.705 | 4.778 | 5.483 | 5.832 | 6.525 |
| 101.6 | – | – | – | – | – | – | 4 | 4.98 | 6 | 7 | 7,872 | 8.82 |
| Stainless Steel Wires and Tubing ASTM Specification & Tolerances | 9 | 1 | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Specification | 1 | 4 | Allowable Outside Diameter | Allowable Wall Thickness | Exact Length | Testing | 1 | 4 | ||||||||||||||||
| Variation in mm | Variation | Tolerance in mm | ||||||||||||||||||||||
| Nominal | Over | Under | %Over | %Under | Over | Under | ||||||||||||||||||
| Diameter | ||||||||||||||||||||||||
| ASTM A213/ ASME SA 213 Seamless Boiler Superheater and Heat Exchanger Wires | 1 | 7 | Under 25.4 | 0.1016 | 0.1016 | 20 | 0 | 3.175 | 0 | Flattening Test | ||||||||||||||
| 25.4-38.1 incl. | 0.1524 | 0.1524 | 22 | 0 | 3.175 | 0 | Tension Test | |||||||||||||||||
| 38.1-50.8 excl. | 0.2032 | 0.2032 | 22 | 0 | 3.176 | 0 | Flare Test | |||||||||||||||||
| 50.8-63.5 excl. | 0.254 | 0.254 | 2 | 0 | 4.46 | 0 | Hardness Test | |||||||||||||||||
| 63.5-76.2 excl. | 0.3048 | 0.3048 | 22 | 0 | 4.76 | 0 | 100% Hydrostatic test | |||||||||||||||||
| 76.2-101.6 | 0.381 | 0.381 | 22 | 0 | 4.76 | 0 | Refer to ASTM A450/ | |||||||||||||||||
| incl. | SA 450 | |||||||||||||||||||||||
| ASTM A249/ ASME SA 249 Welded Boiler Superheater, Heat Exchanger And Condenser Wires | 1 | 9 | Under 25.4 | 0.1016 | 0.1016 | 10 | -10 | 3.175 | 0 | Tension Test | ||||||||||||||
| 25.4-38.1 incl. | 0.1524 | 0.1524 | 10 | -10 | 3.175 | 0 | Flattening Test | |||||||||||||||||
| 38.1-50.8 excl. | 0.2032 | 0.2032 | 10 | -10 | 3.175 | 0 | Flange Test | |||||||||||||||||
| 50.0-63.5 excl. | 0.254 | 0.254 | 10 | -10 | 4.762 | 0 | Reverse Bend Test | |||||||||||||||||
| 63.5-76.2 excl. | 0.3848 | 0.3848 | 10 | -10 | 4.762 | 0 | Hardness Test | |||||||||||||||||
| 76.2-101.6 | 0.381 | 1 | 2 | 0.381 | 1 | 2 | 10 | 1 | 2 | -10 | 1 | 2 | 4.762 | 1 | 2 | 0 | 1 | 2 | 100% Hydrostatic Test Refer to ASTM A450/ SA 450 | 1 | 2 | |||
| incl. | ||||||||||||||||||||||||
| Minimum Wall Wires +18% | ||||||||||||||||||||||||
| 0 available On request | ||||||||||||||||||||||||
| ASTM A269/ ASME SA 269 Seamless & Welded Tubing for General Service | 1 | 7 | Untp12.7 | 0.13 | 0.13 | 15 | -15 | 3.2 | 0 | Flare Test (Seamless Only) | ||||||||||||||
| 12.7-38.1 excl. | 0.13 | 0.13 | 10 | -10 | 3.2 | 0 | Flange Test (Welded Only) | |||||||||||||||||
| 38.1-88.9 excl. | 0.25 | 0.25 | 10 | -10 | 4.8 | 0 | Hardness Test | |||||||||||||||||
| 88.9-139.7 | 0.38 | 0.38 | 10 | -10 | 4.8 | 0 | Reverse Flattening | |||||||||||||||||
| excl. | Test | |||||||||||||||||||||||
| 139.7-203.2 | 0.76 | 1 | 2 | 0.76 | 1 | 2 | 10 | 1 | 2 | -10 | 1 | 2 | 4.8 | 1 | 2 | 0 | 1 | 2 | (Welded only) | |||||
| excl. | 100% Hydrostatic Test Refer to ASTM A269/ SA 269 | |||||||||||||||||||||||
| ASTM A270/ ASME SA 270 Seamless & Welded Sanitary Tubing | 1 | 8 | 25.4 | 0.05 | 0.2 | 10 | -10 | 3.2 | 0 | Reverse flattening Test | ||||||||||||||
| 38.1 | 0.05 | 0.2 | 10 | -10 | 3.2 | 0 | 100% Hydrostatic Test | |||||||||||||||||
| 50.8 | 0.05 | 0.28 | 10 | -10 | 3.2 | 0 | External' polish on all | |||||||||||||||||
| Wires | ||||||||||||||||||||||||
| 60.5 | 1 | 2 | 0.05 | 1 | 2 | 0.28 | 1 | 2 | 10 | 1 | 2 | -10 | 1 | 2 | 3.2 | 1 | 2 | 0 | 1 | 2 | Refer to ASTM A270/ | |||
| SA 270 | ||||||||||||||||||||||||
| 76.2 | 0.08 | 0.3 | 10 | -10 | 3.2 | 0 | ||||||||||||||||||
| 101.6 | 0.08 | 0.38 | 10 | -10 | 3.2 | 0 | ||||||||||||||||||
| ASTM A312/ ASME SA 312 Seamless & Welded Wires | 1 | 7 | 3.175-38.1 | 0.4 | 0.79 | Minimum Wall 12.5% under nominal wall Specified | 2 | 7 | 6.4 0 | 0 | Tension Test | |||||||||||||
| incl. | ||||||||||||||||||||||||
| 38.1-1016 incl. | 0.79 | 0.79 | 6.4 0 | 0 | Flattening Test | |||||||||||||||||||
| 101.6-203.2 | 1.59 | 0.79 | 6.4 0 | 0 | 100% Hydrostatic Test | |||||||||||||||||||
| incl. | ||||||||||||||||||||||||
| (Normally Random | Refer to ASTM A530/ | |||||||||||||||||||||||
| Lengths ordered | SA 530 | |||||||||||||||||||||||
| ASTM A358/ ASME SA 358 Welded Wires | 1 | 3 | 219.08- | 0.50% | 1 | 3 | 1 | 3 | -0.3 | 1 | 3 | 1 | 3 | 6 | 1 | 3 | 1 | 3 | Refer to ASTM A530/ SA 530 | 1 | 3 | |||
| 750mm or | ||||||||||||||||||||||||
| 0.01 inch |
| CHEMICAL COMPOSITION ( IN PERCENTAGE ) | 11 | 1 | ||||||||
| Grade | C (Max) | Mn (Max) | P (Max) | S (Max) | Si (Max) | Cr | Ni | Mo | Nitrogen (Max) | Cu/ Others |
| 301 | 0.15 | 2 | 0.045 | 0.03 | 1 | 16.00 – 18.00 | 6.00 – 8.00 | – | 0.1 | – |
| 304 | 0.08 | 2 | 0.045 | 0.03 | 0.75 | 18.00 – 20.00 | 8.00- 10.50 | – | 0.1 | – |
| 304L | 0.03 | 2 | 0.045 | 0.03 | 0.75 | 18.00 – 20.00 | 8.00- 12.00 | – | 0.1 | – |
| 310S | 0.08 | 2 | 0.045 | 0.03 | 1.5 | 24.00- 26.00 | 19.00 – 22.00 | – | – | – |
| 316 | 0.08 | 2 | 0.045 | 0.03 | 0.75 | 16.00 – 18.00 | 10.00 – 14.00 | 2.00 – 3.00 | 0.1 | – |
| 316L | 0.03 | 2 | 0.045 | 0.03 | 0.75 | 16.00 – 18.00 | 10.00 – 14.00 | 2.00 – 3.00 | 0.1 | – |
| 317 | 0.08 | 2 | 0.045 | 0.03 | 0.75 | 18.00 – 20.00 | 11.00 – 14.00 | 3.00 – 4.00 | 0.1 | – |
| 317L | 0.03 | 2 | 0.045 | 0.03 | 0.75 | 18.00 – 20.00 | 11.00 – 15.00 | 3.00 – 4.00 | 0.1 | – |
| 321 | 0.08 | 2 | 0.045 | 0.03 | 0.75 | 17.00 – 19.00 | 9.00 – 12.00 | – | 0.1 | Ti5 ( C + N ) Min or 0.70 max |
| 347 | 0.08 | 2 | 0.045 | 0.03 | 0.75 | 17.00 – 19.00 | 9.00 – 13.00 | – | – | Cb= 10x ( C Min ) or 1.00 Max |
| 409 | 0.08 | 1 | 0.04 | 0.01 | 1 | 10.50 – 11.75 | 0.5 | – | – | Ti= 6x (C+ N ) Min or 0.70 Max |
| 409M | 0.03 | 0.81.2 | 0.03 | 0.03 | 0.40.75 | 11.00- 12.00 | 1.5 max. | – | – | Ti= 6x (C) Min or 0.70 Max |
| 410S | 0.08 | 1 | 0.04 | 0.03 | 1 | 11.50- 13.50 | 0.6 | – | – | – |
| 410 | 0.15 | 1 | 0.04 | 0.03 | 1 | 11.50- 13.50 | 0.75 | – | – | – |
| 420 | 0.35 | 0.5 | 0.035 | 0.015 | 0.5 | 12.00 – 13.00 | 0.20.3 | – | – | – |
| 430 | 0.12 | 1 | 0.04 | 0.03 | 1 | 16.00 – 18.00 | 0.75 | – | – | – |
| JSL AUS | 0.08 | 7.08.0 | 0.07 | 0.03 | 0.75 | 15.50 – 16.50 | 4.25 – 4.75 | – | – | 0.9 – 1.10 |
| JS- 203 | 0.08 | 9.2510.25 | 0.07 | 0.03 | 0.75 | 14.25 – 15.25 | 2.25 – 2.75 | – | – | 1.60- 2.0 |
| 301M | 0.1 | 4.55.5 | 0.06 | 0.03 | 0.75 | 14.50 – 15.50 | 6.0 – 7.0 | – | – | 1.70- 1.90 |
| * Thickness of 1.27mm & below will have elongation of 20% min. | 11 | 1 |
|---|
| MECHANICAL PROPERTIES | 6 | 1 | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Grade | 1 | 2 | Tensile Strength Mpa, (Min) | 1 | 2 | Yield Strength Mpa, (Min) | 1 | 2 | %Age Elongation in 50mm gauge length min | 1 | 2 | Hardness (Max) | 2 | 1 |
| BHN | Rb | |||||||||||||
| 301 | 515 | 205 | 40 | 217 | 95 | |||||||||
| 304 | 515 | 205 | 40 | 201 | 92 | |||||||||
| 304L | 485 | 170 | 40 | 201 | 92 | |||||||||
| 310S | 515 | 205 | 40 | 217 | 95 | |||||||||
| 316 | 515 | 205 | 40 | 217 | 95 | |||||||||
| 316L | 485 | 170 | 40 | 217 | 95 | |||||||||
| 317 | 515 | 205 | 35 | 217 | 95 | |||||||||
| 317L | 515 | 205 | 40 | 217 | 95 | |||||||||
| 321 | 515 | 205 | 40 | 217 | 95 | |||||||||
| 347 | 515 | 205 | 40 | 201 | 92 | |||||||||
| 409 | 380 | 170 | 20 | 179 | 88 | |||||||||
| 409M | 430 | 275 | 20 | 187 | 90 | |||||||||
| 410S | 415 | 205 | 22 | 183 | 89 | |||||||||
| 410 | 450 | 205 | 20 | 217 | 89 | |||||||||
| 420 | 700( max ) | – | 15 | 217 | 95 | |||||||||
| 430 | 450 | 205 | 22 | 183 | 89 | |||||||||
| JSL AUS | 515 | 205 | 40 | 217 | 95 | |||||||||
| JS- 203 | 515 | 205 | 40 | 217 | 95 | |||||||||
| 301M | 515 | 205 | 40 | 217 | 95 |
| Stainless steel grades listed in the international standard ISO 15510:2010 | 7 | 1 | ||||
|---|---|---|---|---|---|---|
| Type | ISO Designation | EN | UNS | AISI | JIS | GB |
| A | X8NiCrAlTi32-21 | 1.4876 | N08800 | 800 | NCF800 | |
| A | X7NiCrAlTi33-21 | 1.4959 | N08810 | 800H | NCF800H | |
| A | X1NiCrMoCu25-20-5 | 1.4539 | N08904 | 904L | SUS890L | S39042 |
| A | X12CrMnNiN17-7-5 | 1.4372 | S20100 | 201 | SUS201 | S35350 |
| A | X12CrMnNiN18-9-5 | 1.4373 | S20200 | 202 | SUS202 | S35450 |
| A | X2CrNiN18-7 | 1.4318 | S30153 | 301LN | SUS301L | S30153 |
| A | X5CrNi17-7 | 1.4319 | S30100 | 301 | SUS301 | S30110 |
| A | X10CrNi18-8 | 1.4310 | S30100 | 301 | S30110 | |
| A | X12CrNiSi18-9-3 | 1.4326() | S30215 | 302Si | SUS302B | S30240 |
| A | X9CrNi18-9 | 1.4325 | S30200 | 302 | SUS302 | S30210 |
| A | X12CrNiCuS18-9 | 1.4667()[1.4570] | 303Cu | SUS303Cu | ||
| A | X12CrNiSe18-9 | 1.4625() | S30323 | 303Se | SUS303Se | S30327 |
| A | X10CrNiS18-9 | 1.4305 | S30300 | 303 | SUS303 | S30317 |
| A | X6CrNiCuS18-9-2 | 1.4570 | S30331 | 303Cu+ | ||
| A | X3CrNiCu18-9-4 | 1.4567 | S30430 | SUSXM7 | S30488 | |
| A | X6CrNiSiNCe19-10 | 1.4818 | S30415 | S30450 | ||
| A | X6CrNiCu17-8-2 | 1.4567 | SUS304J1 | S30480 | ||
| A | X2CrNiN18-9 | 1.4311 | S30453 | 304LN | SUS304LN | S30453 |
| A | X2CrNiCu19-10 | 1.4650 | 304LCu | SUS304L | S30403 | |
| A | X7CrNi18-9 | 1.4948 | S30409 | 304H | S30409 | |
| A | X6CrNiCu18-9-2 | 1.4567 | S30431 | 304Cu | SUS304J3 | S30480 |
| A | X6CrNiCu19-9-1 | 1.4649() | 304Cu | SUS304Cu | S30488 | |
| A | X5CrNiN19-9 | 1.4315 | S30451 | 304N | SUS304N1 | S30458 |
| A | X2CrNi19-11 | 1.4306 | S30403 | 304L | SUS304L | S30403 |
| A | X2CrNi18-9 | 1.4307,[1.4306] | S30403 | 304L | SUS304L | S30403 |
| A | X5CrNi18-9 | 1.4301 | S30400 | 304 | SUS304 | S30408 |
| A | X4CrNiMoN25-14-1 | 1.4496() | SUS317J2 | |||
| A | X18CrNi23-13 | 1.4833 | S30908 | 309S | SUH309 | S30908 |
| A | X6CrNi23-13 | 1.4950 | S30908 | 309S | SUS309S | S30908 |
| A | X8CrNi25-21 | 1.4845 | S31008 | 310S | SUS310S | S31008 |
| A | X23CrNi25-21 | 1.4845 | S31008 | 310S | SUH310 | S31020 |
| A | X6CrNi25-20 | 1.4951 | S31008 | 310S | SUS310S | S31008 |
| A | X1CrNiMoCuN20-18-7 | 1.4547 | S31254 | SUS312L | S31252 | |
| A | X6CrNiMoCu18-12-2-2 | 1.4665() | SUS316J1 | |||
| A | X6CrNiMoTi17-12-2 | 1.4571 | S31635 | SUS316Ti | S31668 | |
| A | X2CrNiMo17-12-3 | 1.4432 | S31603 | SUS316L | S31603 | |
| A | X2CrNiMoN17-12-3 | 1.4429 | S31653 | 316LN | SUS316LN | S31653 |
| A | X2CrNiMoN17-11-2 | 1.4406 | S31653 | 316LN | SUS316LN | S31653 |
| A | X6CrNiMoN17-12-3 | 1.4495() | S31651 | 316N | SUS316N | S31658 |
| A | X2CrNiMo18-14-3 | 1.4435 | S31603 | 316L | SUS316L | S31603 |
| A | X2CrNiMo17-12-2 | 1.4404 | S31603 | 316L | SUS316L | S31603 |
| A | X6CrNiMoS17-12-3 | 1.4494() | S31620 | 316F | SUS316F | |
| A | X5CrNiMo17-12-2 | 1.4401 | S31600 | 316 | SUS316 | S31608 |
| A | X3CrNiMo17-12-3 | 1.4436 | S31600 | 316 | SUS316 | S31608 |
| A | X3CrNiMo18-16-5 | 1.4476() | SUS317J1 | S31794 | ||
| A | X2CrNiMo19-14-4 | 1.4438 | S31703 | SUS317L | S31703 | |
| A | X6CrNiMo19-13-4 | 1.4445() | S31700 | 317 | SUS317 | S31708 |
| A | X2CrNiMoN18-12-4 | 1.4434 | S31753 | 317LN | SUS317LN | S31753 |
| A | X7CrNiTi18-10 | 1.4940,1.4541 | S32109 | 321H | SUS321H | S32169 |
| A | X6CrNiTi18-10 | 1.4541 | S32100 | 321 | SUS321 | S32168 |
| A | X7CrNiNb18-10 | 1.4912 | S34709 | 347H | SUS347H | |
| A | X6CrNiNb18-10 | 1.4550 | S34700 | 347 | SUS347 | S34778 |
| A | X3NiCr18-16 | 1.4389() | S38400 | 384 | SUS384 | S38408 |
| A PH | X6NiCrTiMoVB25-15-2 | 1.4980,1.4606 | S66286() | 660 | SUH660 | S51525 |
| AF | X2CrNiMoN25-7-3 | 1.4481() | S31260 | SUS329J4L | S22583 | |
| AF | X2CrNiMoN22-5-3 | 1.4462 | S32205,S3 | F51,F60 | SUS329J3L | S22053 |
| AF | X2CrNiN23-4 | 1.4362 | S32304 | S23043 | ||
| AF | X3CrNiMoCuN26-6-3-2 | 1.4507 | S32550 | S25554 | ||
| AF | X2CrNiMoCuWN25-7-4 | 1.4501 | S32760 | S27603 | ||
| AF | X6CrNiMo26-4-2 | 1.4480() | S32900 | 329 | SUS329J1 | |
| A:austenitic | F:ferritic | AF: austenitic-ferritic | ":'AISI like'common name | () EN nb issued for ISO grade | -C Chinese based composition | -I genuine ISO composition |
| (1) | The ISO name is composed of 4 parts structure XXXX-YYY-ZZ-T | 5 | 1 | -U USA based composition | ||
| XXXX is a remindr of the European coding, YYY a reminder of the old AISI codes, ZZ an ISO coding and T an additional information | 7 | 1 |
| MIDDLE EAST Saudi Arabia Iran Iraq UAE Qatar Bahrain Oman Kuwait Turkey Yemen Syria Jordan Cyprus | AFRICA Nigeria Algeria Angola South Africa Libya Egypt Sudan Equatorial Guinea The Republic Of Congo Gabon NORTH AMERICA USA Canada Mexico Panama Costa Rica Puerto Rica Trinidad And Tobago Jamaica Bahamas Denmark | EUROPE Russia Norway Germany France Italy UK Spain Ukraine Netherland Belgium Greece Czech Republic Portugal Hungary Albania Austria Switzerland Slovakia Finland Ireland Croatia Slovenia Malta | ASIA India Singapore Malaysia Indonesia Thailand Vietnam South Korea Japan Sri Lanka Maldives Bangladesh Mayanmar Taiwan Cambodia | SOUTH AMERICA Argentina Bolivia Brazil Chile Venezuela Colombia Ecuador Guyana Paraguay Uruguay |
|---|
Grade, dimensions, quantity and standard. We will come back with availability and price.
