Stainless Steel

Seamless pipe from 1/8″ NB to 40″ NB, in schedules 5 through XXS, across austenitic, duplex and high-alloy grades.

Seamless tube specified by outside diameter and wall thickness, for heat exchanger, boiler, condenser and instrumentation service.

Welded pipe in schedules 5 through XXS, the economic choice for lower-pressure and larger-diameter service.

Welded tube to outside diameter and wall thickness, including thin-wall sections from 0.5 mm.

Round, square, hexagonal and threaded bar from 10 mm to 300 mm, in six delivery conditions and tolerance classes H7 to H10.

Stainless wire for spring, weld, rope, mesh, forming and cold-heading applications.

Sheet and plate across the full austenitic, ferritic, duplex and high-alloy range, in mill and polished finishes.

Hot and cold rolled coil for slitting, pressing, roll-forming and tube-making.

Precision thin-gauge strip, shim stock and foil down to 0.02 mm.

Flat and angle sections, hot rolled and cold drawn, for structural and fabricated work.

Blanked circles for deep drawing, spinning and pressed vessel work.

Rolled and forged rings for flange, bearing and seal service.

Buttweld, forged, investment cast, olet, bar stock, dairy, ferrule and furniture fittings.

Ball, gate, globe, check, butterfly and needle valves in stainless and high-alloy trim.

Screws, nuts, bolts, washers, threaded bar, anchors, rivets, pins and machined fasteners.

CNC and VMC machined components to drawing, across 14 processes and 13 materials, verified on CMM.