Stainless steel exporter from India: SS 202, 304, 316 and nickel alloys.
Rajgranth Metal & Alloys has manufactured, stocked and exported stainless steel since 1980. We ship pipes, tubes, bars, sheets, plates and coils, including grade SS 202, to 79 markets across Asia, the Middle East, Africa, Europe and the Americas, with EN 10204 3.1 mill certificates and Incoterms quoted to your port.
SS 202 stainless steel: composition, properties and forms.
SS 202 (UNS S20200) is the cost-effective austenitic grade: manganese and nitrogen replace part of the nickel used in 304. It suits dry, indoor and decorative use. We supply it as pipe, tube, bar, sheet, plate, coil, strip, flat and circle, with a mill test certificate, from our Mumbai stockyard.
| Element | Carbon | Manganese | Silicon | Phosphorus | Sulphur | Chromium | Nickel | Nitrogen |
|---|---|---|---|---|---|---|---|---|
| Limit | 0.15 max | 7.50 – 10.00 | 1.00 max | 0.060 max | 0.030 max | 17.00 – 19.00 | 4.00 – 6.00 | 0.25 max |
Scroll the table horizontally to see all columns.
| Property | Requirement |
|---|---|
| Tensile strength | 515 MPa minimum |
| Yield strength (0.2% offset) | 260 MPa minimum |
| Elongation in 50 mm | 40% minimum |
| Hardness | 95 HRB maximum (217 HBW) |
Scroll the table horizontally to see all columns.
| Standard | Designation |
|---|---|
| UNS | S20200 |
| AISI / ASTM | Type 202 |
| EN / Werkstoff | 1.4373 (X12CrMnNiN18-9-5) |
| JIS | SUS 202 |
Scroll the table horizontally to see all columns.
| SS 202 | SS 304 | |
|---|---|---|
| Nickel | 4.0 – 6.0 % | 8.0 – 10.5 % |
| Manganese | 7.5 – 10.0 % | 2.0 % max |
| Chromium | 17.0 – 19.0 % | 17.5 – 19.5 % |
| Yield strength, annealed (A240) | 260 MPa min | 205 MPa min |
| Corrosion resistance | Lower: dry and indoor service | Higher: general purpose, mild chlorides |
| Relative cost | Lower | Higher (reference) |
| Typical use | Kitchenware, furniture, decorative tube, interior trim | Food, dairy, chemical, architectural, process |
Scroll the table horizontally to see all columns.
Limits shown are the published ASTM A240 values for UNS S20200. Pipe, tube and bar standards carry their own limits, and 200-series chemistry varies between mills, so confirm the composition against the mill test certificate supplied with the material.
SS 202 products we supply
Where we export stainless steel.
Choose your country for the grades, ports, documents and terms that apply.
South Asia
Africa
We also supply other markets in Europe, the Americas and Asia. See the full list of 79 export markets.
Documents, packing and terms for export orders.
Documents
06- Mill Test Certificate (EN 10204 3.1)
- Third Party Inspection (EN 10204 3.2) on request
- Certificate of Origin
- Commercial Invoice and Packing List
- Bill of Lading / Airway Bill
- Insurance certificate where required
Packing
05- Seaworthy wooden cases and pallets
- Bundled and strapped with edge protection
- Plastic end caps on pipe and tube
- VCI and moisture barrier wrapping where specified
- Customer-specified marking and heat number stencilling
Incoterms
05- FOB
- CFR
- CIF
- EXW
- DAP
Loading ports
04- Nhava Sheva (JNPT)
- Mumbai
- Mundra
- Kandla
Products we export.
Every form is available in SS 202 and the other grades we hold, with sizes to your specification.
- Seamless Pipes15 grades
- Seamless Tubes15 grades
- Welded Pipes12 grades
- Welded Tubes12 grades
- Round Bars18 grades
- Wires6 grades
- Sheet & Plate18 grades
- Coils15 grades
- Strips, Shims & Foils4 grades
- Flat Bars15 grades
- Circles8 grades
- Rings6 grades
- Pipe Fittings6 grades
- Valves4 grades
- Fasteners5 grades
- Precision Components6 grades
FAQ
07SS 202 and export questions
- What is SS 202 stainless steel?
- SS 202 (UNS S20200, EN 1.4373, JIS SUS 202) is a chromium-manganese-nickel austenitic stainless steel. Manganese and nitrogen replace part of the nickel used in 304, which makes it cheaper and gives it a higher annealed yield strength, at the cost of lower corrosion resistance.
- What is the difference between SS 202 and SS 304?
- 202 has about 4–6% nickel and 7.5–10% manganese; 304 has about 8–10.5% nickel and 2% manganese at most. 202 costs less and is stronger when annealed, but 304 resists corrosion better and forms better. Use 202 for dry, indoor, decorative and general fabrication, and 304 or 316 for food, chemical, outdoor and coastal service.
- Where is SS 202 used?
- Kitchenware and cookware, decorative and architectural tube and trim indoors, furniture frames, elevator and interior panels, appliances, and general dry fabrication. It is not recommended for coastal, chloride or chemical-process service.
- Is SS 202 magnetic?
- In the annealed condition it is non-magnetic. Cold working can make it slightly magnetic, as with other austenitic grades.
- Which forms of SS 202 do you supply?
- Welded and seamless pipes and tubes, round bars, sheets and plates, coils, strips and foils, flat bars and circles, in the finishes and sizes we hold. Send the size, quantity and standard and we will confirm availability.
- Do you supply a mill test certificate for SS 202?
- Yes. Material is supplied with a mill test certificate to EN 10204 3.1 as standard, heat-traceable, showing chemical composition and mechanical properties. 3.2 with third-party inspection is available on request. Always confirm the composition on the certificate, because 200-series chemistry varies between mills.
- Do you export SS 202 to Vietnam, the Middle East and other countries?
- Yes. We export stainless steel from Mumbai to markets across Asia, the Middle East, Africa, Europe and the Americas, including Vietnam, Indonesia, Malaysia, Thailand, the UAE, Saudi Arabia, Oman and Bangladesh. Quotations state the Incoterm and the named port.
Tell us the grade, size, quantity and destination.
We will confirm availability, documents and the Incoterm to your port.