Flats and angles are the structural stainless sections — supports, frames, brackets and edging — supplied either hot rolled for fabrication or cold drawn where edge condition and tolerance matter.
Flats and angles are the structural stainless sections — supports, frames, brackets and edging — supplied either hot rolled for fabrication or cold drawn where edge condition and tolerance matter. Rajgranth Metal & Alloys has been trading since 1980, is self-funded and debt-free, and despatches most orders from its Mumbai stockyard within two days.
Flat and angle sections, hot rolled and cold drawn, for structural and fabricated work. We manufacture, stock, supply and export stainless Steel Flat Bars from Mumbai, Maharashtra, in 15 grades, so most requirements can be met from held stock instead of waiting on a mill.
Our published range covers thickness 3 mm, 60 mm, width 10 mm, 300 mm, section Flat, Angle, Channel, Square and length 3 m, 6 m (Customised length per requirement). Sizes outside the stocked range can be produced to order; send the dimensions with your enquiry.
Stainless Steel Flat Bars are available in 202, 200 Series, 303, 304 / 304L, 310 / 310S, 316 / 316L, 317 / 317L, 321 / 321H, 347 / 347H, 904L, Duplex / Super Duplex, 400 Series, 254 SMO, 17-4 PH and Alloy 20. Each grade has its own page with composition, designations, mechanical properties and the sizes we hold.
Material is supplied to ASTM A276, ASTM A479 / ASME SA-479 and EN 10088-3. Finishes and conditions include Hot rolled, Cold drawn, Polished and Black. HSN code 7222.
Stainless Steel Flat Bars from Rajgranth are used in structural supports, fabrication, frames and brackets and architectural trim. We supply across India and export to markets in the Middle East, Africa, Europe, Asia, North America and South America.
Material is supplied with documentation, tested in house across 18 listed testing facilities, and covered by our ISO 9001:2015 quality management system. Rajgranth Metal & Alloys has been trading since 1980, is self-funded and debt-free, and despatches most orders from its Mumbai stockyard within two days.
Customised length per requirement
Each grade page carries its own composition, corrosion behaviour, standards cross-reference and limitations.
Chromium-manganese-nickel austenitic grade. A lower-cost alternative to 304 for dry, indoor and decorative use.
Manganese and nitrogen substitute for nickel. A cost-driven austenitic family.
304 with sulphur added for machinability. The free-machining austenitic.
The default austenitic stainless. 18% chromium, 8% nickel, no molybdenum.
25% chromium, 20% nickel. A heat-resisting grade, not a corrosion-resisting one.
304 plus 2–3% molybdenum. The standard answer to chlorides and mild acids.
Higher molybdenum than 316, at 3–4%. The step up before super-austenitics.
304 stabilised with titanium. Resists sensitisation in the 425–815 degrees C range.
Stabilised with niobium rather than titanium. Preferred where weld filler purity matters.
High nickel, high molybdenum, with copper. Built for sulphuric acid service.
Roughly equal austenite and ferrite. Around twice the yield strength of 316L.
Ferritic and martensitic chromium grades. Magnetic, nickel-free, hardenable.
6% molybdenum super-austenitic with nitrogen. PREN above 42.
Martensitic PH grade. Machine soft, then age to tensile strengths above 1300 MPa.
Nickel-iron-chromium with copper and niobium. Developed for sulphuric acid.
The full detail for this product as supplied from our Mumbai stockyard: sizes, grades, standards, tolerances, tests and applications.
Rajgranth Metals is a trusted stockholder, supplier, and exporter of stainless steel flat bars in Mumbai, India. We have 201, 202, J3, 303, 304, 304L, 304LN, 304H, 309, 310, 316, 316L, 316LN, 316H, 316TI, 317, 317L, 317LN, 321, 321H, 347, 347H, 904, 904L, duplex, and super duplex SA240 UNS NO. Our stock of stainless steel flat bars includes a thickness range of 1mm up to 40mm. Trust us at Rajgranth Metals & Alloys to deliver premium-grade stainless steel solutions tailored to your unique requirements.
Get A Quote NOW
| Stainless Steel Flat Bar | 2 | 1 |
|---|---|---|
| Product | Stainless Steel Flat Bar | |
| SS Grade | 201, 202, J3, 303, 304, 304L, 304LN, 304H, 309, 310, 316, 316L, 316LN, 316H, 316TI, 317, 317L, 317LN, 321, 321H, 347, 347H, 904, 904L, duplex & super duplex SA240 UNS NO. S31803 , S32205 , S32550 , S32750 , S32760, SMO 254, 17-4PH, Alloy 20, and more grade as per requirment. | |
| Specifications | AISI - ASTM - EN - JIS | |
| Size | 3mm - 500mm Standard & Non-standard Size | |
| Thickness | 1mm - 40mm | |
| Length | 2000mm, 2500mm, 3000mm, Standard & Non-standard Size | |
| Surface Finish | 2B , BA , NO.8 , CR , HR , MATE PVC | |
| Shape | Sim , Foil , Coil , Sheet , Plate , Flat | |
| Available Make | JINDAL , TATA , SAIL , POSCO , TISCO , THYSSENKRUPP , ACERINOX , COLOMBUS STAINLESS |
| MIDDLE EAST Saudi Arabia Iran Iraq UAE Qatar Bahrain Oman Kuwait Turkey Yemen Syria Jordan Cyprus | AFRICA Nigeria Algeria Angola South Africa Libya Egypt Sudan Equatorial Guinea The Republic Of Congo Gabon NORTH AMERICA USA Canada Mexico Panama Costa Rica Puerto Rica Trinidad And Tobago Jamaica Bahamas Denmark | EUROPE Russia Norway Germany France Italy UK Spain Ukraine Netherland Belgium Greece Czech Republic Portugal Hungary Albania Austria Switzerland Slovakia Finland Ireland Croatia Slovenia Malta | ASIA India Singapore Malaysia Indonesia Thailand Vietnam South Korea Japan Sri Lanka Maldives Bangladesh Mayanmar Taiwan Cambodia | SOUTH AMERICA Argentina Bolivia Brazil Chile Venezuela Colombia Ecuador Guyana Paraguay Uruguay |
|---|
Grade, dimensions, quantity and standard. We will come back with availability and price.
