Stainless Steel 202 Coil: manufacturer, stockist and exporter in Mumbai, India
Rajgranth Metal & Alloys supplies stainless steel 202 coil (UNS S20200) from Mumbai and exports it to 18 markets.
What is SS 202 coil?
Coil is flat-rolled material supplied wound on a core, for processors who slit, blank or roll-form it. In SS 202, coil is what tube mills, utensil makers and panel fabricators buy: it is the form in which the lower price of 202 is realised across a whole production run.
Chromium-manganese-nickel austenitic grade. A lower-cost alternative to 304 for dry, indoor and decorative use.
Rajgranth Metal & Alloys lists SS 202 among the grades it supplies and exports from Mumbai.
SS 202 designations and equivalents
| Standard | Designation |
|---|---|
| UNS | S20200 |
| AISI / ASTM | Type 202 |
| EN / Werkstoff | 1.4373 (X12CrMnNiN18-9-5) |
| JIS | SUS 202 |
Scroll the table horizontally to see all columns.
SS 202 chemical composition
Limits are those of the standard named in the table caption. Product-specific standards for pipe, tube and bar carry their own limits, so always confirm the composition on the mill test certificate supplied with the material.
| Element | Carbon | Manganese | Silicon | Phosphorus | Sulphur | Chromium | Nickel | Nitrogen |
|---|---|---|---|---|---|---|---|---|
| Limit | 0.15 max | 7.50 – 10.00 | 1.00 max | 0.060 max | 0.030 max | 17.00 – 19.00 | 4.00 – 6.00 | 0.25 max |
Scroll the table horizontally to see all columns.
SS 202 mechanical properties
| Property | Requirement |
|---|---|
| Tensile strength | 515 MPa minimum |
| Yield strength (0.2% offset) | 260 MPa minimum |
| Elongation in 50 mm | 40% minimum |
| Hardness | 95 HRB maximum (217 HBW) |
Scroll the table horizontally to see all columns.
SS 202 coil: sizes and finishes
The published size range, finishes and conditions for coil are set out on the coils pages, which list every dimension we publish. Sizes outside the range can be produced to order; send the dimensions with your enquiry.
| Parameter | Range |
|---|---|
| Thickness | 0.3 mm, 8 mm |
| Width | 100 mm, 2000 mm |
| Coil ID | 508 mm, 610 mm |
Scroll the table horizontally to see all columns.
Standards for SS 202 coil
SS 202 coil is commonly specified to ASTM A240 / ASME SA-240 and ASTM A480. Commonly specified product standards. Confirm the standard, edition and any supplementary requirements on your order; we supply to the standard you name.
Why buyers choose SS 202 coil
Coil is bought in volume, so a lower price per kilogram compounds across the whole order.
It feeds tube mills, slitting lines and press shops directly, with no sheet handling.
A range of finishes (2B, BA, No. 4, hairline and mirror) lets one grade serve several product lines.
Where SS 202 coil is used
- Feedstock for welded tube and pipe mills
- Slitting into strip
- Blanking for utensils and cookware
- Roll-forming of trim and profiles
- Pressing of appliance and panel parts
What to state when you enquire for SS 202 coil
- Thickness in mm (0.3 mm to 8 mm published) and width (100 mm to 2000 mm published)
- Coil inner diameter: 508 mm or 610 mm
- Coil weight, or the maximum your uncoiler takes
- Surface finish and whether film is required
- Edge: mill edge or slit edge
- The standard and certificate required
What to check on SS 202 coil before and after delivery
On a coil, check edge condition, camber and coil set on the first delivery, since these decide how the material behaves on your line. Confirm inner diameter and coil weight against your uncoiler before ordering. Chemistry matters more on coil than anywhere, because a whole production run inherits it, so check the certificate chemistry against the 202 limits.
Remember the grade's main limit: lower corrosion resistance than 304 and 316.
Export of SS 202 coil from India
SS 202 coil is exported from Mumbai to 18 confirmed markets, quoted with the Incoterm and named port.
SS 202 compared with similar grades
Buyers who look at SS 202 coil usually also compare SS 304, SS 201 and SS 316. The grade pages below give each one's designations, properties and limits side by side so you can choose for the service rather than the price alone.
FAQ
10Questions answered
- What coil sizes of SS 202 do you supply?
- The published range is thickness from 0.3 mm to 8 mm and width from 100 mm to 2000 mm, on a coil inner diameter of 508 mm or 610 mm. Send your requirement and we confirm.
- Is SS 202 coil suitable for tube making?
- Yes, 202 coil is widely used as feedstock for welded tube and pipe. Tell us the strip width, thickness and finish your mill needs, and whether the coil is to be slit.
- What coil weights are available?
- Coil weight depends on the size and what your uncoiler takes. State the maximum weight and inner diameter you can handle and we confirm what can be supplied.
- Can the coil be slit to width?
- Say in your enquiry whether slitting is needed, with the strip widths and quantities, and we confirm whether it can be done before shipment.
- Do you export SS 202 coil in containers?
- Yes, coil is exported from Mumbai. Packing and shipping are described in the export section above, and the quotation states the Incoterm and the named port.
- Which standard applies to SS 202 coil?
- SS 202 coil is commonly specified to ASTM A240 / ASME SA-240 and ASTM A480. Confirm the standard and edition on your order.
- What is the minimum yield and tensile strength of SS 202?
- In the annealed condition, SS 202 has a minimum yield strength of 260 MPa and a minimum tensile strength of 515 MPa, per the standard named in the table above.
- What is the UNS number and EN designation of SS 202?
- Stainless Steel 202 is designated UNS S20200, EN 1.4373, AISI 202 and JIS SUS 202, and is also called 202 stainless steel, SUS 202, 1.4373 and S20200.
- What are the main alloying elements in SS 202?
- To the standard in the composition table, SS 202 carries chromium 17.00 – 19.00 and nickel 4.00 – 6.00 percent by weight. Confirm the composition on the mill test certificate supplied with your material.
- Do you supply a mill test certificate with SS 202 coil?
- Yes, to EN 10204 3.1 as standard, showing chemistry and mechanical properties against the heat. EN 10204 3.2 with third-party inspection is available on request.
Grade
Products
Compare
Export
Industries
Guides
Send us the specification.
Grade, dimensions, quantity and standard. We will come back with availability and price.