Inconel 600 is a solid-solution nickel-chromium alloy used where both oxidising high-temperature service and chloride stress corrosion cracking are concerns. The high nickel content confers near-immunity to chloride SCC, and the chromium supports oxidation resistance to around 1100 degrees C. It is not a strong acid-resistant alloy — for reducing acids the C-family alloys are correct.
Indexed to 304. Indicative, for specification triage.
Rajgranth Metal & Alloys manufactures, stocks, supplies and exports Inconel 600 (UNS N06600) circles (UNS N06600) from Mumbai. Nickel-chromium-iron alloy. Resists oxidation and chloride SCC to high temperature. Rajgranth Metal & Alloys has been trading since 1980, is self-funded and debt-free, and despatches most orders from its Mumbai stockyard within two days.
Inconel 600 is a solid-solution nickel-chromium alloy used where both oxidising high-temperature service and chloride stress corrosion cracking are concerns. The high nickel content confers near-immunity to chloride SCC, and the chromium supports oxidation resistance to around 1100 degrees C. It is not a strong acid-resistant alloy — for reducing acids the C-family alloys are correct.
Inconel 600 (UNS N06600) is also designated UNS N06600, EN 2.4816 and Werkstoff NiCr15Fe. Quote the designation your specification uses and we will supply to it.
Effectively immune to chloride stress corrosion cracking, Oxidation resistance to approximately 1100 degrees C, Resists dry chlorine and hydrogen chloride at temperature and Non-magnetic and tough at cryogenic temperature. It is non-magnetic, with good weldability and difficult machinability, and is used in continuous service in air up to about 1100 °C.
Poor resistance to sulphur-bearing atmospheres at temperature, Limited resistance to strongly reducing acids and High cost and demanding machining. We state these plainly so the grade is chosen for the right service.
Our published range covers diameter 50 mm, 2000 mm, thickness 0.3 mm, 20 mm and edge Sheared, Machined, Deburred. Standards include ASTM A240 / ASME SA-240 and EN 10088-2. Finishes and conditions include No. 1, 2B, BA, No. 4 and Mirror.
heat treating furnace retorts and fixtures, chemical and food processing equipment, nuclear steam generator tubing and titanium dioxide production. Typical industries: chemical, power & energy, nuclear, aerospace and plant engineering. We supply across India and export to markets in the Middle East, Africa, Europe, Asia, North America and South America.
Material is supplied with documentation, tested in house across 18 listed testing facilities, and covered by our ISO 9001:2015 quality management system. Rajgranth Metal & Alloys has been trading since 1980, is self-funded and debt-free, and despatches most orders from its Mumbai stockyard within two days. Ready stock of nickel alloy is held; ask for current availability.
Send the size, quantity and standard. We will confirm availability against stock and come back with price.
