Do you supply duplex and super duplex to Qatar?

Duplex and super duplex are among the grades we list. Send the grade, form, size and standard and we confirm availability.

Is Hamad Port the only route into Qatar?

It is the main sea route and the port we quote to. Other routing, for example through another Gulf port and by road, can be arranged on request.

What finishes can SS 202 sheet be supplied in?

The published finishes are No. 1, 2B, 2D, BA, No. 4, hairline, mirror (No. 8), matt and chequered. For polished finishes, ask for protective film so the surface survives handling.

Is SS 202 sheet good for kitchen equipment?

For dry, indoor kitchen furniture and equipment, yes. For surfaces in food contact or washdown with chloride cleaners, 304 or 316 is the safer specification.

How is sheet & plate shipped to Qatar?

By sea from Nhava Sheva (JNPT) or Mumbai to Hamad Port. The quotation states the Incoterm and the named port, and quotations are typically returned the same working day. Call +91 79779 45282 or use the Request a Quote form.

Export to Qatar · Sheet & Plate

Stainless steel sheet & plate supplier and exporter in Qatar.

Rajgranth Metal & Alloys exports sheet & plate to Qatar from Mumbai in SS 202, 304, 316, duplex and nickel alloy grades, shipped to Hamad Port with an EN 10204 3.1 mill certificate. Buyers are contractors, fabricators and suppliers to the gas, power and construction sectors.

Quote sheet & plate for Qatar All products for Qatar

01Sheet & Plate in Qatar

What Qatar buyers use sheet & plate for.

Qatar's demand comes from LNG and gas processing, petrochemicals, power and water, and construction and infrastructure.

Environment and grade choice

Extreme heat, high humidity on the coast and salt air. Gas-processing sites add aggressive process media. Gas and process service needs 316L, duplex, super duplex or nickel alloy. SS 202 fits indoor decorative use only.

Standards in Qatar

ASTM, ASME and API apply, along with operator specifications for gas and petrochemical projects. Buyers in the region typically specify ASTM or EN standards, expect EN 10204 3.1 certificates, and often require third-party inspection, which we arrange to EN 10204 3.2 on request.

02SS 202 sheet & plate

Sheet & Plate: what to know before you order.

Sheet is the thinner flat product, supplied cut to size in a stated surface finish. In SS 202 it is the form behind kitchen equipment, appliance panels, elevator and interior cladding, signage and decorative fabrication used indoors.

Sheet and plate cover everything from 0.3 mm decorative sheet to heavy plate for pressure vessel fabrication. The finish designation matters as much as the grade: 2B, No. 4 and BA behave very differently in service and in fabrication.

Why buyers choose SS 202 here

Surface appearance is the point of sheet, and 202 takes the standard finishes (2B, BA, No. 4, hairline and mirror) at a lower price than 304.
Higher annealed yield strength than 304 gives panels that resist denting a little better in thin gauge.
Cost savings are largest on high-area products such as cladding and panels, where sheet is bought by the square metre.

What to state in your enquiry

Thickness in mm and the sheet size, with width of 1000, 1219, 1500 or 2000 mm published
Surface finish: 2B, BA, No. 4, hairline, mirror, matt or chequered
Protective film on one side or both for polished finishes
Quantity in sheets or kilograms
The standard and certificate required
Whether sheets are to be cut to size

Published range

04 rows

Thickness: 0.3 mm100 mm
Width: 1000 mm1219 mm1500 mm2000 mm
Length: 2000 mm2438 mm3000 mm6000 mm
Form: SheetPlateCoilCircleFlat

All sheet & plate: grades, standards and finishes →SS 202 composition and properties →

03Shipping

Shipping sheet & plate to Qatar.

Documents

Mill Test Certificate (EN 10204 3.1)
Third Party Inspection (EN 10204 3.2) on request
Certificate of Origin
Commercial Invoice and Packing List
Bill of Lading / Airway Bill
Insurance certificate where required

Incoterms

Ports for Qatar

Hamad Port: Qatar's main container and general cargo port, south of Doha

FAQ

Sheet & Plate export to Qatar: questions answered

Do you supply duplex and super duplex to Qatar?: Duplex and super duplex are among the grades we list. Send the grade, form, size and standard and we confirm availability.
Is Hamad Port the only route into Qatar?: It is the main sea route and the port we quote to. Other routing, for example through another Gulf port and by road, can be arranged on request.
What finishes can SS 202 sheet be supplied in?: The published finishes are No. 1, 2B, 2D, BA, No. 4, hairline, mirror (No. 8), matt and chequered. For polished finishes, ask for protective film so the surface survives handling.
Is SS 202 sheet good for kitchen equipment?: For dry, indoor kitchen furniture and equipment, yes. For surfaces in food contact or washdown with chloride cleaners, 304 or 316 is the safer specification.
How is sheet & plate shipped to Qatar?: By sea from Nhava Sheva (JNPT) or Mumbai to Hamad Port. The quotation states the Incoterm and the named port, and quotations are typically returned the same working day. Call +91 79779 45282 or use the Request a Quote form.

More products for Qatar

Sheet & Plate for other countries

Need sheet & plate in Qatar?

State the grade, size, quantity, standard and destination port. We will confirm availability, documents and the Incoterm for Qatar.

Request a Quote Talk to Sales