Shuwaikh or Shuaiba for refinery work?

Shuaiba is near the refineries and industrial areas; Shuwaikh serves Kuwait City. We quote to the port nearest your site.

Do you supply nickel alloy to Kuwait?

Nickel alloys are supplied on enquiry, with availability confirmed per grade and size. State the alloy, form and standard.

What finishes can SS 202 sheet be supplied in?

The published finishes are No. 1, 2B, 2D, BA, No. 4, hairline, mirror (No. 8), matt and chequered. For polished finishes, ask for protective film so the surface survives handling.

Is SS 202 sheet good for kitchen equipment?

For dry, indoor kitchen furniture and equipment, yes. For surfaces in food contact or washdown with chloride cleaners, 304 or 316 is the safer specification.

How is sheet & plate shipped to Kuwait?

By sea from Nhava Sheva (JNPT) or Mumbai to Shuwaikh or Shuaiba. The quotation states the Incoterm and the named port, and quotations are typically returned the same working day. Call +91 79779 45282 or use the Request a Quote form.

Export to Kuwait · Sheet & Plate

Stainless steel sheet & plate supplier and exporter in Kuwait.

Rajgranth Metal & Alloys exports sheet & plate to Kuwait from Mumbai in SS 202, 304, 316, duplex and nickel alloy grades, shipped to Shuwaikh or Shuaiba with an EN 10204 3.1 mill certificate. Buyers are contractors and suppliers to refining, petrochemical, power and construction projects.

Quote sheet & plate for Kuwait All products for Kuwait

01Sheet & Plate in Kuwait

What Kuwait buyers use sheet & plate for.

Kuwait's demand comes from oil and gas, refining and petrochemicals, power and water, and construction.

Environment and grade choice

Extreme summer heat, dust and salt air on a shallow Gulf coast. Industrial sites near refineries add chemical atmospheres. Refinery and process service needs 316L, duplex or nickel alloy. SS 202 is for dry indoor use.

Standards in Kuwait

ASTM, ASME and API are the working standards, with operator specifications for oil and refining projects. Buyers in the region typically specify ASTM or EN standards, expect EN 10204 3.1 certificates, and often require third-party inspection, which we arrange to EN 10204 3.2 on request.

02SS 202 sheet & plate

Sheet & Plate: what to know before you order.

Sheet is the thinner flat product, supplied cut to size in a stated surface finish. In SS 202 it is the form behind kitchen equipment, appliance panels, elevator and interior cladding, signage and decorative fabrication used indoors.

Sheet and plate cover everything from 0.3 mm decorative sheet to heavy plate for pressure vessel fabrication. The finish designation matters as much as the grade: 2B, No. 4 and BA behave very differently in service and in fabrication.

Why buyers choose SS 202 here

Surface appearance is the point of sheet, and 202 takes the standard finishes (2B, BA, No. 4, hairline and mirror) at a lower price than 304.
Higher annealed yield strength than 304 gives panels that resist denting a little better in thin gauge.
Cost savings are largest on high-area products such as cladding and panels, where sheet is bought by the square metre.

What to state in your enquiry

Thickness in mm and the sheet size, with width of 1000, 1219, 1500 or 2000 mm published
Surface finish: 2B, BA, No. 4, hairline, mirror, matt or chequered
Protective film on one side or both for polished finishes
Quantity in sheets or kilograms
The standard and certificate required
Whether sheets are to be cut to size

Published range

04 rows

Thickness: 0.3 mm100 mm
Width: 1000 mm1219 mm1500 mm2000 mm
Length: 2000 mm2438 mm3000 mm6000 mm
Form: SheetPlateCoilCircleFlat

All sheet & plate: grades, standards and finishes →SS 202 composition and properties →

03Shipping

Shipping sheet & plate to Kuwait.

Documents

Mill Test Certificate (EN 10204 3.1)
Third Party Inspection (EN 10204 3.2) on request
Certificate of Origin
Commercial Invoice and Packing List
Bill of Lading / Airway Bill
Insurance certificate where required

Incoterms

Ports for Kuwait

Shuwaikh: the main commercial port in Kuwait City
Shuaiba: the industrial port south of Kuwait City, close to the refineries

FAQ

Sheet & Plate export to Kuwait: questions answered

Shuwaikh or Shuaiba for refinery work?: Shuaiba is near the refineries and industrial areas; Shuwaikh serves Kuwait City. We quote to the port nearest your site.
Do you supply nickel alloy to Kuwait?: Nickel alloys are supplied on enquiry, with availability confirmed per grade and size. State the alloy, form and standard.
What finishes can SS 202 sheet be supplied in?: The published finishes are No. 1, 2B, 2D, BA, No. 4, hairline, mirror (No. 8), matt and chequered. For polished finishes, ask for protective film so the surface survives handling.
Is SS 202 sheet good for kitchen equipment?: For dry, indoor kitchen furniture and equipment, yes. For surfaces in food contact or washdown with chloride cleaners, 304 or 316 is the safer specification.
How is sheet & plate shipped to Kuwait?: By sea from Nhava Sheva (JNPT) or Mumbai to Shuwaikh or Shuaiba. The quotation states the Incoterm and the named port, and quotations are typically returned the same working day. Call +91 79779 45282 or use the Request a Quote form.

More products for Kuwait

Sheet & Plate for other countries

Need sheet & plate in Kuwait?

State the grade, size, quantity, standard and destination port. We will confirm availability, documents and the Incoterm for Kuwait.

Request a Quote Talk to Sales