Shuwaikh or Shuaiba for refinery work?

Shuaiba is near the refineries and industrial areas; Shuwaikh serves Kuwait City. We quote to the port nearest your site.

Do you supply nickel alloy to Kuwait?

Nickel alloys are supplied on enquiry, with availability confirmed per grade and size. State the alloy, form and standard.

Is SS 202 round bar easy to machine?

Machinability is fair rather than good, and the grade work-hardens, so use sharp tooling, positive feeds and rigid setups. If the part is mostly machining, free-machining 303 may be the better grade where it is acceptable.

What diameters and tolerances do you supply?

Diameters from 10 mm to 300 mm are published, in tolerance classes H7, H8, H9 and H10, and in round, square, hexagonal and threaded shapes. Send the size and class and we confirm.

How is round bars shipped to Kuwait?

By sea from Nhava Sheva (JNPT) or Mumbai to Shuwaikh or Shuaiba. The quotation states the Incoterm and the named port, and quotations are typically returned the same working day. Call +91 79779 45282 or use the Request a Quote form.

Export to Kuwait · Round Bars

Stainless steel round bars supplier and exporter in Kuwait.

Rajgranth Metal & Alloys exports round bars to Kuwait from Mumbai in SS 202, 304, 316, duplex and nickel alloy grades, shipped to Shuwaikh or Shuaiba with an EN 10204 3.1 mill certificate. Buyers are contractors and suppliers to refining, petrochemical, power and construction projects.

Quote round bars for Kuwait All products for Kuwait

01Round Bars in Kuwait

What Kuwait buyers use round bars for.

Kuwait's demand comes from oil and gas, refining and petrochemicals, power and water, and construction.

Environment and grade choice

Extreme summer heat, dust and salt air on a shallow Gulf coast. Industrial sites near refineries add chemical atmospheres. Refinery and process service needs 316L, duplex or nickel alloy. SS 202 is for dry indoor use.

Standards in Kuwait

ASTM, ASME and API are the working standards, with operator specifications for oil and refining projects. Buyers in the region typically specify ASTM or EN standards, expect EN 10204 3.1 certificates, and often require third-party inspection, which we arrange to EN 10204 3.2 on request.

02SS 202 round bars

Round Bars: what to know before you order.

Round bar is solid feedstock, supplied in a stated delivery condition and tolerance class. In SS 202 it is bought for machined and turned parts in dry, indoor service, where the lower cost of 202 helps and the part will not see chlorides.

Bar is the feedstock for almost everything machined — shafts, valve internals, fasteners, fittings. What decides whether it is fit for the job is not the grade alone but the delivery condition and the tolerance class, which is why both are specified here up front rather than buried in a quotation.

Why buyers choose SS 202 here

Higher annealed yield strength than 304 gives a stiffer, harder-wearing part in light-duty mechanisms.
Cost per kilogram is lower than 304, which matters on high-volume turned parts where bar is the main cost.
Bar is available in several delivery conditions, so the same grade can serve rough-turned and ground-and-polished parts.

What to state in your enquiry

Shape: round, square, hexagonal or threaded
Diameter in mm and tolerance class (H7 to H10 published)
Delivery condition: export bright, peeled or turned, cold drawn, centreless ground and polished, black or forged
Length: 5 m to 6.5 m published, cut lengths to order
Bar ends: plain or bevelled
Marking: size, grade, specification and heat number

Published range

06 rows

Diameter: 10 mm300 mm
Shape: RoundSquareHexagonalThreaded
Tolerance: H7H8H9H10
Length: 5 m6.5 m
Customised length per requirement
Bar ends: PlainBevelled
Marking: SizeGradeSpecificationHeat number

All round bars: grades, standards and finishes →SS 202 composition and properties →

03Shipping

Shipping round bars to Kuwait.

Documents

Mill Test Certificate (EN 10204 3.1)
Third Party Inspection (EN 10204 3.2) on request
Certificate of Origin
Commercial Invoice and Packing List
Bill of Lading / Airway Bill
Insurance certificate where required

Incoterms

Ports for Kuwait

Shuwaikh: the main commercial port in Kuwait City
Shuaiba: the industrial port south of Kuwait City, close to the refineries

FAQ

Round Bars export to Kuwait: questions answered

Shuwaikh or Shuaiba for refinery work?: Shuaiba is near the refineries and industrial areas; Shuwaikh serves Kuwait City. We quote to the port nearest your site.
Do you supply nickel alloy to Kuwait?: Nickel alloys are supplied on enquiry, with availability confirmed per grade and size. State the alloy, form and standard.
Is SS 202 round bar easy to machine?: Machinability is fair rather than good, and the grade work-hardens, so use sharp tooling, positive feeds and rigid setups. If the part is mostly machining, free-machining 303 may be the better grade where it is acceptable.
What diameters and tolerances do you supply?: Diameters from 10 mm to 300 mm are published, in tolerance classes H7, H8, H9 and H10, and in round, square, hexagonal and threaded shapes. Send the size and class and we confirm.
How is round bars shipped to Kuwait?: By sea from Nhava Sheva (JNPT) or Mumbai to Shuwaikh or Shuaiba. The quotation states the Incoterm and the named port, and quotations are typically returned the same working day. Call +91 79779 45282 or use the Request a Quote form.

More products for Kuwait

Round Bars for other countries

Need round bars in Kuwait?

State the grade, size, quantity, standard and destination port. We will confirm availability, documents and the Incoterm for Kuwait.

Request a Quote Talk to Sales