Shuwaikh or Shuaiba for refinery work?

Shuaiba is near the refineries and industrial areas; Shuwaikh serves Kuwait City. We quote to the port nearest your site.

Do you supply nickel alloy to Kuwait?

Nickel alloys are supplied on enquiry, with availability confirmed per grade and size. State the alloy, form and standard.

What is the difference between 202 tube and 202 pipe?

Tube is sized by actual outside diameter and wall thickness; pipe by nominal bore and schedule. Tube also comes in square and rectangular sections. Decorative and furniture work almost always means tube.

Is 202 tube good for handrails and furniture?

Yes, indoors. It polishes well, forms into frames and costs less than 304. For rails outdoors or near the coast, 304 or 316 is the safer choice because 202 can stain and corrode in exposed conditions.

How is welded tubes shipped to Kuwait?

By sea from Nhava Sheva (JNPT) or Mumbai to Shuwaikh or Shuaiba. The quotation states the Incoterm and the named port, and quotations are typically returned the same working day. Call +91 79779 45282 or use the Request a Quote form.

Export to Kuwait · Welded Tubes

Stainless steel welded tubes supplier and exporter in Kuwait.

Rajgranth Metal & Alloys exports welded tubes to Kuwait from Mumbai in SS 202, 304, 316, duplex and nickel alloy grades, shipped to Shuwaikh or Shuaiba with an EN 10204 3.1 mill certificate. Buyers are contractors and suppliers to refining, petrochemical, power and construction projects.

Quote welded tubes for Kuwait All products for Kuwait

01Welded Tubes in Kuwait

What Kuwait buyers use welded tubes for.

Kuwait's demand comes from oil and gas, refining and petrochemicals, power and water, and construction.

Environment and grade choice

Extreme summer heat, dust and salt air on a shallow Gulf coast. Industrial sites near refineries add chemical atmospheres. Refinery and process service needs 316L, duplex or nickel alloy. SS 202 is for dry indoor use.

Standards in Kuwait

ASTM, ASME and API are the working standards, with operator specifications for oil and refining projects. Buyers in the region typically specify ASTM or EN standards, expect EN 10204 3.1 certificates, and often require third-party inspection, which we arrange to EN 10204 3.2 on request.

02SS 202 welded tubes

Welded Tubes: what to know before you order.

Welded tube is formed from strip and seam-welded, which allows thin walls and round, square and rectangular sections at a lower cost. It is the form behind most 202 furniture, handrail and decorative work.

Welded tube covers the thin-wall range efficiently — down to 0.5 mm wall — where drawing a seamless section would be uneconomic. Standard duty across furniture, architectural, food and general instrumentation work.

Why buyers choose SS 202 here

Thin-wall welded tube is where the cost advantage of 202 over 304 is easiest to exploit, because the tube mill is converting strip rather than machining solid.
A bright, even polish on 202 tube gives the look of stainless at a lower price for interior decoration.
Round, square and rectangular sections allow one material to serve frames, rails and trim in a single project.

What to state in your enquiry

Section: round, square or rectangular
Outside diameter or width and height, and wall thickness in mm
Welded or seamless
Length and whether cut to length
Finish: bright annealed, annealed and pickled, satin or mirror polish
Quantity in metres, pieces or kilograms

Published range

04 rows

Outside diameter: 4.776.2
mm — larger sizes to order
Wall thickness: 0.50.91.21.62.02.53.0
mm
Length: 5 m6.5 m
Customised per requirement
Tube ends: PlainBevelled

All welded tubes: grades, standards and finishes →SS 202 composition and properties →

03Shipping

Shipping welded tubes to Kuwait.

Documents

Mill Test Certificate (EN 10204 3.1)
Third Party Inspection (EN 10204 3.2) on request
Certificate of Origin
Commercial Invoice and Packing List
Bill of Lading / Airway Bill
Insurance certificate where required

Incoterms

Ports for Kuwait

Shuwaikh: the main commercial port in Kuwait City
Shuaiba: the industrial port south of Kuwait City, close to the refineries

FAQ

Welded Tubes export to Kuwait: questions answered

Shuwaikh or Shuaiba for refinery work?: Shuaiba is near the refineries and industrial areas; Shuwaikh serves Kuwait City. We quote to the port nearest your site.
Do you supply nickel alloy to Kuwait?: Nickel alloys are supplied on enquiry, with availability confirmed per grade and size. State the alloy, form and standard.
What is the difference between 202 tube and 202 pipe?: Tube is sized by actual outside diameter and wall thickness; pipe by nominal bore and schedule. Tube also comes in square and rectangular sections. Decorative and furniture work almost always means tube.
Is 202 tube good for handrails and furniture?: Yes, indoors. It polishes well, forms into frames and costs less than 304. For rails outdoors or near the coast, 304 or 316 is the safer choice because 202 can stain and corrode in exposed conditions.
How is welded tubes shipped to Kuwait?: By sea from Nhava Sheva (JNPT) or Mumbai to Shuwaikh or Shuaiba. The quotation states the Incoterm and the named port, and quotations are typically returned the same working day. Call +91 79779 45282 or use the Request a Quote form.

More products for Kuwait

Welded Tubes for other countries

Need welded tubes in Kuwait?

State the grade, size, quantity, standard and destination port. We will confirm availability, documents and the Incoterm for Kuwait.

Request a Quote Talk to Sales