How should cargo be packed for Nigerian humidity?

Export packing protects against moisture in transit, but storage in the humid climate matters too. Tell us how long the material will sit before use and we advise.

Do you supply for oil and gas in Nigeria?

We supply stainless steel and nickel alloy in the standards listed on this site. Where an operator specification applies, send it so we can confirm what we can meet.

What is the difference between 202 tube and 202 pipe?

Tube is sized by actual outside diameter and wall thickness; pipe by nominal bore and schedule. Tube also comes in square and rectangular sections. Decorative and furniture work almost always means tube.

Is 202 tube good for handrails and furniture?

Yes, indoors. It polishes well, forms into frames and costs less than 304. For rails outdoors or near the coast, 304 or 316 is the safer choice because 202 can stain and corrode in exposed conditions.

How is welded tubes shipped to Nigeria?

By sea from Nhava Sheva (JNPT) or Mumbai to Lagos (Apapa, Tin Can). The quotation states the Incoterm and the named port, and quotations are typically returned the same working day. Call +91 79779 45282 or use the Request a Quote form.

Export to Nigeria · Welded Tubes

Stainless steel welded tubes supplier and exporter in Nigeria.

Rajgranth Metal & Alloys exports welded tubes to Nigeria from Mumbai in SS 202, 304, 316, duplex and nickel alloy grades, shipped to Lagos (Apapa, Tin Can) with an EN 10204 3.1 mill certificate. Buyers include contractors serving oil and gas, fabricators, food and beverage plant builders and traders.

Quote welded tubes for Nigeria All products for Nigeria

01Welded Tubes in Nigeria

What Nigeria buyers use welded tubes for.

Nigeria's demand comes from oil and gas, food and beverage processing, power, and construction.

Environment and grade choice

A hot, humid tropical coast, with high chloride exposure around Lagos and the Niger Delta and a drier north. Heavy rainfall and humidity affect storage. Coastal and process service needs 316L, duplex or nickel alloy. SS 202 is for dry indoor decorative use only.

Standards in Nigeria

ASTM and API are commonly specified, with SON requirements for some products. Project and operator specifications can govern oil and gas supply. Buyers in the region typically ask for pipe, tube, sheet and bar in 202, 304 and 316, with documentation that clears customs and meets project requirements.

02SS 202 welded tubes

Welded Tubes: what to know before you order.

Welded tube is formed from strip and seam-welded, which allows thin walls and round, square and rectangular sections at a lower cost. It is the form behind most 202 furniture, handrail and decorative work.

Welded tube covers the thin-wall range efficiently — down to 0.5 mm wall — where drawing a seamless section would be uneconomic. Standard duty across furniture, architectural, food and general instrumentation work.

Why buyers choose SS 202 here

Thin-wall welded tube is where the cost advantage of 202 over 304 is easiest to exploit, because the tube mill is converting strip rather than machining solid.
A bright, even polish on 202 tube gives the look of stainless at a lower price for interior decoration.
Round, square and rectangular sections allow one material to serve frames, rails and trim in a single project.

What to state in your enquiry

Section: round, square or rectangular
Outside diameter or width and height, and wall thickness in mm
Welded or seamless
Length and whether cut to length
Finish: bright annealed, annealed and pickled, satin or mirror polish
Quantity in metres, pieces or kilograms

Published range

04 rows

Outside diameter: 4.776.2
mm — larger sizes to order
Wall thickness: 0.50.91.21.62.02.53.0
mm
Length: 5 m6.5 m
Customised per requirement
Tube ends: PlainBevelled

All welded tubes: grades, standards and finishes →SS 202 composition and properties →

03Shipping

Shipping welded tubes to Nigeria.

Documents

Mill Test Certificate (EN 10204 3.1)
Third Party Inspection (EN 10204 3.2) on request
Certificate of Origin
Commercial Invoice and Packing List
Bill of Lading / Airway Bill
Insurance certificate where required

Incoterms

Ports for Nigeria

Lagos (Apapa, Tin Can): Nigeria's busiest ports, serving Lagos and most of the country's imports

FAQ

Welded Tubes export to Nigeria: questions answered

How should cargo be packed for Nigerian humidity?: Export packing protects against moisture in transit, but storage in the humid climate matters too. Tell us how long the material will sit before use and we advise.
Do you supply for oil and gas in Nigeria?: We supply stainless steel and nickel alloy in the standards listed on this site. Where an operator specification applies, send it so we can confirm what we can meet.
What is the difference between 202 tube and 202 pipe?: Tube is sized by actual outside diameter and wall thickness; pipe by nominal bore and schedule. Tube also comes in square and rectangular sections. Decorative and furniture work almost always means tube.
Is 202 tube good for handrails and furniture?: Yes, indoors. It polishes well, forms into frames and costs less than 304. For rails outdoors or near the coast, 304 or 316 is the safer choice because 202 can stain and corrode in exposed conditions.
How is welded tubes shipped to Nigeria?: By sea from Nhava Sheva (JNPT) or Mumbai to Lagos (Apapa, Tin Can). The quotation states the Incoterm and the named port, and quotations are typically returned the same working day. Call +91 79779 45282 or use the Request a Quote form.

More products for Nigeria

Welded Tubes for other countries

Need welded tubes in Nigeria?

State the grade, size, quantity, standard and destination port. We will confirm availability, documents and the Incoterm for Nigeria.

Request a Quote Talk to Sales