Rajgranth Metal & Alloys exports welded tubes to Egypt from Mumbai in SS 202, 304, 316, duplex and nickel alloy grades, shipped to Alexandria or Port Said with an EN 10204 3.1 mill certificate. Typical buyers are contractors, food and chemical plant builders, fabricators and traders.
Egypt's demand comes from construction and architecture, food processing, petrochemicals and fertilisers, power, and the Suez Canal economic zone.
A hot, dry interior and a humid Mediterranean and Red Sea coast. Alexandria and the canal cities carry marine chlorides while Cairo and the inland are dry. Inland, dry interior work suits 202 or 304; coastal and canal-zone sites need 316 or duplex.
Egyptian Standards (ES) apply domestically, with ASTM and EN commonly specified on imported steel. Buyers in the region typically ask for pipe, tube, sheet and bar in 202, 304 and 316, with documentation that clears customs and meets project requirements.
Welded tube is formed from strip and seam-welded, which allows thin walls and round, square and rectangular sections at a lower cost. It is the form behind most 202 furniture, handrail and decorative work.
Welded tube covers the thin-wall range efficiently — down to 0.5 mm wall — where drawing a seamless section would be uneconomic. Standard duty across furniture, architectural, food and general instrumentation work.
mm — larger sizes to order
mm
Customised per requirement
All welded tubes: grades, standards and finishes →SS 202 composition and properties →
State the grade, size, quantity, standard and destination port. We will confirm availability, documents and the Incoterm for Egypt.
