Rajgranth Metal & Alloys exports welded tubes to United Arab Emirates from Mumbai in SS 202, 304, 316, duplex and nickel alloy grades, shipped to Jebel Ali or Sharjah with an EN 10204 3.1 mill certificate. Typical buyers are contractors, fabricators, trading houses and re-exporters, and project procurement teams.
The UAE's demand comes from construction and architecture, oil and gas (including ADNOC projects), water and desalination, food and hospitality, and re-export through Jebel Ali to the wider Gulf and Africa.
Extreme heat, high coastal humidity, salt-laden air and desert dust. Chloride exposure on the Gulf coast is severe for exposed metal, and indoor air-conditioned spaces are a completely different environment. Interior architectural work can use 202 or 304; exterior, marine and process work needs 316, duplex or nickel alloy because of coastal chlorides.
ASTM and ASME are widely used, with API and BS EN for oil and gas and building work. Operator specifications such as ADNOC's can add requirements beyond the commodity standard. Buyers in the region typically specify ASTM or EN standards, expect EN 10204 3.1 certificates, and often require third-party inspection, which we arrange to EN 10204 3.2 on request.
Welded tube is formed from strip and seam-welded, which allows thin walls and round, square and rectangular sections at a lower cost. It is the form behind most 202 furniture, handrail and decorative work.
Welded tube covers the thin-wall range efficiently — down to 0.5 mm wall — where drawing a seamless section would be uneconomic. Standard duty across furniture, architectural, food and general instrumentation work.
mm — larger sizes to order
mm
Customised per requirement
All welded tubes: grades, standards and finishes →SS 202 composition and properties →
State the grade, size, quantity, standard and destination port. We will confirm availability, documents and the Incoterm for United Arab Emirates.
