Rajgranth Metal & Alloys exports welded tubes to Bangladesh from Mumbai in SS 202, 304, 316, duplex and nickel alloy grades, shipped to Chattogram (Chittagong) with an EN 10204 3.1 mill certificate. Typical buyers are pharmaceutical and food equipment fabricators, shipyards, textile machinery builders and traders.
Bangladesh's demand comes from textile and garment machinery, pharmaceuticals, food and beverage processing, shipbuilding, power and construction.
A monsoon climate with extreme humidity, seasonal flooding, and saline conditions across the southern delta. These are some of the harshest conditions for any stainless grade in South Asia. In humid, flood-prone and saline conditions we recommend 316 or duplex for anything exposed. SS 202 is for dry indoor use only.
BDS national standards exist, but ASTM and BS are commonly cited on imported steel. State the standard and test certificate you need. Buyers in the region typically ask for welded tube, pipe, sheet and bar in 202 and 304 with a mill test certificate.
Welded tube is formed from strip and seam-welded, which allows thin walls and round, square and rectangular sections at a lower cost. It is the form behind most 202 furniture, handrail and decorative work.
Welded tube covers the thin-wall range efficiently — down to 0.5 mm wall — where drawing a seamless section would be uneconomic. Standard duty across furniture, architectural, food and general instrumentation work.
mm — larger sizes to order
mm
Customised per requirement
All welded tubes: grades, standards and finishes →SS 202 composition and properties →
State the grade, size, quantity, standard and destination port. We will confirm availability, documents and the Incoterm for Bangladesh.
