Rajgranth Metal & Alloys exports seamless pipes to Cambodia from Mumbai in SS 202, 304, 316, duplex and nickel alloy grades, shipped to Sihanoukville with an EN 10204 3.1 mill certificate. Buyers are typically contractors, fabricators and traders serving construction and hospitality customers.
Cambodia's demand comes from construction, factory fit-out for the garment and manufacturing sectors, food and beverage processing, and hospitality.
A tropical monsoon climate with a wet and a dry season and high humidity. Sites near the coast and the Mekong see more corrosion than inland ones. SS 202 is common for indoor furniture, trims and decorative fit-out; use 304 or 316 for kitchens, food contact and any outdoor or coastal location.
Imports are usually specified to ASTM, JIS or EN. Local requirements are limited, so the project or buyer specification normally governs. Buyers in the region typically order coils, sheets, welded pipe and tube in 202 and 304, polished or in 2B finish.
Seamless pipe is pierced and drawn or extruded from a solid billet, so it has no weld seam. Buyers choose it where a seam is unwanted or a design code asks for it. It costs more than welded pipe, so confirm that the duty actually needs it.
Seamless pipe is drawn or extruded from a solid billet, so it carries no longitudinal weld and no heat-affected zone. That matters wherever the line sees pressure cycling, elevated temperature or an aggressive medium — which is why it dominates refinery, chemical and power service. RGM manufactures and stocks seamless pipe across the full austenitic range plus duplex, super duplex, 904L, SMO 254, 17-4PH and Alloy 20.
mm
1/4″ to 24″ held as primary stock range
SWG, mm
Customised up to 12 m per requirement
All seamless pipes: grades, standards and finishes →SS 202 composition and properties →
State the grade, size, quantity, standard and destination port. We will confirm availability, documents and the Incoterm for Cambodia.
