Rajgranth Metal & Alloys exports seamless pipes to Malaysia from Mumbai in SS 202, 304, 316, duplex and nickel alloy grades, shipped to Port Klang or Penang with an EN 10204 3.1 mill certificate. Typical buyers are process equipment builders, food and palm oil plant contractors, fabricators and distributors.
Malaysian demand comes from oil and gas, palm oil processing, food and beverage, chemicals, the electronics and semiconductor cluster around Penang, and construction.
A hot, humid, equatorial climate with coastal salt on both sides of the peninsula. Palm oil and food plants add washdown with cleaning chemicals, which is hard on lower grades. Food, palm oil and washdown service calls for 304L, 316L or duplex rather than 202. SS 202 is used for indoor furniture, decorative work and light fabrication.
Malaysian Standards (MS) exist, but projects commonly specify ASTM, ASME, BS or EN, and oil and gas work follows operator and API requirements. Buyers in the region typically order coils, sheets, welded pipe and tube in 202 and 304, polished or in 2B finish.
Seamless pipe is pierced and drawn or extruded from a solid billet, so it has no weld seam. Buyers choose it where a seam is unwanted or a design code asks for it. It costs more than welded pipe, so confirm that the duty actually needs it.
Seamless pipe is drawn or extruded from a solid billet, so it carries no longitudinal weld and no heat-affected zone. That matters wherever the line sees pressure cycling, elevated temperature or an aggressive medium — which is why it dominates refinery, chemical and power service. RGM manufactures and stocks seamless pipe across the full austenitic range plus duplex, super duplex, 904L, SMO 254, 17-4PH and Alloy 20.
mm
1/4″ to 24″ held as primary stock range
SWG, mm
Customised up to 12 m per requirement
All seamless pipes: grades, standards and finishes →SS 202 composition and properties →
State the grade, size, quantity, standard and destination port. We will confirm availability, documents and the Incoterm for Malaysia.
