Rajgranth Metal & Alloys exports seamless pipes to Sri Lanka from Mumbai in SS 202, 304, 316, duplex and nickel alloy grades, shipped to Colombo with an EN 10204 3.1 mill certificate. Buyers are food and tea-processing equipment makers, hotel and construction contractors, and traders.
Sri Lanka's demand comes from tea and food processing, apparel factories, construction and hospitality, and kitchenware.
A tropical island climate with warm, humid, salt-laden air everywhere. No site on the island is far from the sea, so chloride resistance is a routine consideration. Because of the coastal environment, 304 or 316 is the safer choice for most uses. SS 202 suits indoor decorative and furniture work.
SLS national standards apply, and ASTM and BS are commonly used for imported steel. Specify what your project requires. Buyers in the region typically ask for welded tube, pipe, sheet and bar in 202 and 304 with a mill test certificate.
Seamless pipe is pierced and drawn or extruded from a solid billet, so it has no weld seam. Buyers choose it where a seam is unwanted or a design code asks for it. It costs more than welded pipe, so confirm that the duty actually needs it.
Seamless pipe is drawn or extruded from a solid billet, so it carries no longitudinal weld and no heat-affected zone. That matters wherever the line sees pressure cycling, elevated temperature or an aggressive medium — which is why it dominates refinery, chemical and power service. RGM manufactures and stocks seamless pipe across the full austenitic range plus duplex, super duplex, 904L, SMO 254, 17-4PH and Alloy 20.
mm
1/4″ to 24″ held as primary stock range
SWG, mm
Customised up to 12 m per requirement
All seamless pipes: grades, standards and finishes →SS 202 composition and properties →
State the grade, size, quantity, standard and destination port. We will confirm availability, documents and the Incoterm for Sri Lanka.
