Rajgranth Metal & Alloys exports seamless pipes to Egypt from Mumbai in SS 202, 304, 316, duplex and nickel alloy grades, shipped to Alexandria or Port Said with an EN 10204 3.1 mill certificate. Typical buyers are contractors, food and chemical plant builders, fabricators and traders.
Egypt's demand comes from construction and architecture, food processing, petrochemicals and fertilisers, power, and the Suez Canal economic zone.
A hot, dry interior and a humid Mediterranean and Red Sea coast. Alexandria and the canal cities carry marine chlorides while Cairo and the inland are dry. Inland, dry interior work suits 202 or 304; coastal and canal-zone sites need 316 or duplex.
Egyptian Standards (ES) apply domestically, with ASTM and EN commonly specified on imported steel. Buyers in the region typically ask for pipe, tube, sheet and bar in 202, 304 and 316, with documentation that clears customs and meets project requirements.
Seamless pipe is pierced and drawn or extruded from a solid billet, so it has no weld seam. Buyers choose it where a seam is unwanted or a design code asks for it. It costs more than welded pipe, so confirm that the duty actually needs it.
Seamless pipe is drawn or extruded from a solid billet, so it carries no longitudinal weld and no heat-affected zone. That matters wherever the line sees pressure cycling, elevated temperature or an aggressive medium — which is why it dominates refinery, chemical and power service. RGM manufactures and stocks seamless pipe across the full austenitic range plus duplex, super duplex, 904L, SMO 254, 17-4PH and Alloy 20.
mm
1/4″ to 24″ held as primary stock range
SWG, mm
Customised up to 12 m per requirement
All seamless pipes: grades, standards and finishes →SS 202 composition and properties →
State the grade, size, quantity, standard and destination port. We will confirm availability, documents and the Incoterm for Egypt.
