Rajgranth Metal & Alloys exports seamless pipes to Oman from Mumbai in SS 202, 304, 316, duplex and nickel alloy grades, shipped to Sohar or Salalah with an EN 10204 3.1 mill certificate. Typical buyers are EPC and fabrication contractors, industrial-zone manufacturers and suppliers to the energy sector.
Oman's demand comes from oil and gas, petrochemical and industrial zones at Sohar and Duqm, construction, and desalination and power.
Hot desert interior and a humid coast on the Gulf of Oman and Arabian Sea. Coastal industrial zones carry chlorides, and the south has a monsoon humidity season. Industrial and coastal service needs 316L, duplex or nickel alloy. SS 202 is for indoor decorative use.
ASTM, ASME and API are the usual working standards. Operator requirements, for example for oil and gas fields, can be stricter. Buyers in the region typically specify ASTM or EN standards, expect EN 10204 3.1 certificates, and often require third-party inspection, which we arrange to EN 10204 3.2 on request.
Seamless pipe is pierced and drawn or extruded from a solid billet, so it has no weld seam. Buyers choose it where a seam is unwanted or a design code asks for it. It costs more than welded pipe, so confirm that the duty actually needs it.
Seamless pipe is drawn or extruded from a solid billet, so it carries no longitudinal weld and no heat-affected zone. That matters wherever the line sees pressure cycling, elevated temperature or an aggressive medium — which is why it dominates refinery, chemical and power service. RGM manufactures and stocks seamless pipe across the full austenitic range plus duplex, super duplex, 904L, SMO 254, 17-4PH and Alloy 20.
mm
1/4″ to 24″ held as primary stock range
SWG, mm
Customised up to 12 m per requirement
All seamless pipes: grades, standards and finishes →SS 202 composition and properties →
State the grade, size, quantity, standard and destination port. We will confirm availability, documents and the Incoterm for Oman.
