Rajgranth Metal & Alloys exports seamless pipes to Bangladesh from Mumbai in SS 202, 304, 316, duplex and nickel alloy grades, shipped to Chattogram (Chittagong) with an EN 10204 3.1 mill certificate. Typical buyers are pharmaceutical and food equipment fabricators, shipyards, textile machinery builders and traders.
Bangladesh's demand comes from textile and garment machinery, pharmaceuticals, food and beverage processing, shipbuilding, power and construction.
A monsoon climate with extreme humidity, seasonal flooding, and saline conditions across the southern delta. These are some of the harshest conditions for any stainless grade in South Asia. In humid, flood-prone and saline conditions we recommend 316 or duplex for anything exposed. SS 202 is for dry indoor use only.
BDS national standards exist, but ASTM and BS are commonly cited on imported steel. State the standard and test certificate you need. Buyers in the region typically ask for welded tube, pipe, sheet and bar in 202 and 304 with a mill test certificate.
Seamless pipe is pierced and drawn or extruded from a solid billet, so it has no weld seam. Buyers choose it where a seam is unwanted or a design code asks for it. It costs more than welded pipe, so confirm that the duty actually needs it.
Seamless pipe is drawn or extruded from a solid billet, so it carries no longitudinal weld and no heat-affected zone. That matters wherever the line sees pressure cycling, elevated temperature or an aggressive medium — which is why it dominates refinery, chemical and power service. RGM manufactures and stocks seamless pipe across the full austenitic range plus duplex, super duplex, 904L, SMO 254, 17-4PH and Alloy 20.
mm
1/4″ to 24″ held as primary stock range
SWG, mm
Customised up to 12 m per requirement
All seamless pipes: grades, standards and finishes →SS 202 composition and properties →
State the grade, size, quantity, standard and destination port. We will confirm availability, documents and the Incoterm for Bangladesh.
