Which port serves Riyadh?

Most cargo for Riyadh comes in through Dammam on the Gulf coast and travels by road. We quote to Dammam or Jeddah as you prefer.

Can you meet Saudi Aramco material specifications?

We cannot promise a specification we have not seen. Send the exact requirement and we confirm what we can supply and what documentation is possible.

Is SS 202 round bar easy to machine?

Machinability is fair rather than good, and the grade work-hardens, so use sharp tooling, positive feeds and rigid setups. If the part is mostly machining, free-machining 303 may be the better grade where it is acceptable.

What diameters and tolerances do you supply?

Diameters from 10 mm to 300 mm are published, in tolerance classes H7, H8, H9 and H10, and in round, square, hexagonal and threaded shapes. Send the size and class and we confirm.

How is round bars shipped to Saudi Arabia?

By sea from Nhava Sheva (JNPT) or Mumbai to Jeddah or Dammam. The quotation states the Incoterm and the named port, and quotations are typically returned the same working day. Call +91 79779 45282 or use the Request a Quote form.

Export to Saudi Arabia · Round Bars

Stainless steel round bars supplier and exporter in Saudi Arabia.

Rajgranth Metal & Alloys exports round bars to Saudi Arabia from Mumbai in SS 202, 304, 316, duplex and nickel alloy grades, shipped to Jeddah or Dammam with an EN 10204 3.1 mill certificate. Buyers include EPC contractors, fabricators, oil and gas suppliers and trading companies.

Quote round bars for Saudi Arabia All products for Saudi Arabia

01Round Bars in Saudi Arabia

What Saudi Arabia buyers use round bars for.

Saudi demand comes from oil and gas, petrochemicals at Jubail and Yanbu, power, desalination and water, and large construction and infrastructure programmes.

Environment and grade choice

Desert heat, desert dust, and salt-laden humid air along both the Gulf and Red Sea coasts. Coastal industrial sites expose material to heavy chlorides. Process and coastal service calls for 316L, duplex, super duplex or nickel alloy. SS 202 fits only indoor decorative and general fabrication.

Standards in Saudi Arabia

ASTM, ASME and API are the working standards, with SASO national requirements for some products and operator specifications such as Saudi Aramco's for oil and gas projects. Buyers in the region typically specify ASTM or EN standards, expect EN 10204 3.1 certificates, and often require third-party inspection, which we arrange to EN 10204 3.2 on request.

02SS 202 round bars

Round Bars: what to know before you order.

Round bar is solid feedstock, supplied in a stated delivery condition and tolerance class. In SS 202 it is bought for machined and turned parts in dry, indoor service, where the lower cost of 202 helps and the part will not see chlorides.

Bar is the feedstock for almost everything machined — shafts, valve internals, fasteners, fittings. What decides whether it is fit for the job is not the grade alone but the delivery condition and the tolerance class, which is why both are specified here up front rather than buried in a quotation.

Why buyers choose SS 202 here

Higher annealed yield strength than 304 gives a stiffer, harder-wearing part in light-duty mechanisms.
Cost per kilogram is lower than 304, which matters on high-volume turned parts where bar is the main cost.
Bar is available in several delivery conditions, so the same grade can serve rough-turned and ground-and-polished parts.

What to state in your enquiry

Shape: round, square, hexagonal or threaded
Diameter in mm and tolerance class (H7 to H10 published)
Delivery condition: export bright, peeled or turned, cold drawn, centreless ground and polished, black or forged
Length: 5 m to 6.5 m published, cut lengths to order
Bar ends: plain or bevelled
Marking: size, grade, specification and heat number

Published range

06 rows

Diameter: 10 mm300 mm
Shape: RoundSquareHexagonalThreaded
Tolerance: H7H8H9H10
Length: 5 m6.5 m
Customised length per requirement
Bar ends: PlainBevelled
Marking: SizeGradeSpecificationHeat number

All round bars: grades, standards and finishes →SS 202 composition and properties →

03Shipping

Shipping round bars to Saudi Arabia.

Documents

Mill Test Certificate (EN 10204 3.1)
Third Party Inspection (EN 10204 3.2) on request
Certificate of Origin
Commercial Invoice and Packing List
Bill of Lading / Airway Bill
Insurance certificate where required

Incoterms

Ports for Saudi Arabia

Jeddah: the Red Sea gateway serving western Saudi Arabia and Makkah and Madinah regions
Dammam: the Gulf-side port serving the Eastern Province and, by road, Riyadh

FAQ

Round Bars export to Saudi Arabia: questions answered

Which port serves Riyadh?: Most cargo for Riyadh comes in through Dammam on the Gulf coast and travels by road. We quote to Dammam or Jeddah as you prefer.
Can you meet Saudi Aramco material specifications?: We cannot promise a specification we have not seen. Send the exact requirement and we confirm what we can supply and what documentation is possible.
Is SS 202 round bar easy to machine?: Machinability is fair rather than good, and the grade work-hardens, so use sharp tooling, positive feeds and rigid setups. If the part is mostly machining, free-machining 303 may be the better grade where it is acceptable.
What diameters and tolerances do you supply?: Diameters from 10 mm to 300 mm are published, in tolerance classes H7, H8, H9 and H10, and in round, square, hexagonal and threaded shapes. Send the size and class and we confirm.
How is round bars shipped to Saudi Arabia?: By sea from Nhava Sheva (JNPT) or Mumbai to Jeddah or Dammam. The quotation states the Incoterm and the named port, and quotations are typically returned the same working day. Call +91 79779 45282 or use the Request a Quote form.

More products for Saudi Arabia

Round Bars for other countries

Need round bars in Saudi Arabia?

State the grade, size, quantity, standard and destination port. We will confirm availability, documents and the Incoterm for Saudi Arabia.

Request a Quote Talk to Sales