Which grade for pharmaceutical equipment in Bangladesh?

Pharmaceutical contact surfaces are normally 316L. We supply 316L with a mill test certificate; confirm the surface finish and traceability your customer requires.

How is cargo routed to Bangladesh?

By sea to Chattogram, from Nhava Sheva or Mumbai, with the Incoterm and port named in the quotation. Other routing can be discussed.

Is SS 202 round bar easy to machine?

Machinability is fair rather than good, and the grade work-hardens, so use sharp tooling, positive feeds and rigid setups. If the part is mostly machining, free-machining 303 may be the better grade where it is acceptable.

What diameters and tolerances do you supply?

Diameters from 10 mm to 300 mm are published, in tolerance classes H7, H8, H9 and H10, and in round, square, hexagonal and threaded shapes. Send the size and class and we confirm.

How is round bars shipped to Bangladesh?

By sea from Nhava Sheva (JNPT) or Mumbai to Chattogram (Chittagong). The quotation states the Incoterm and the named port, and quotations are typically returned the same working day. Call +91 79779 45282 or use the Request a Quote form.

Export to Bangladesh · Round Bars

Stainless steel round bars supplier and exporter in Bangladesh.

Rajgranth Metal & Alloys exports round bars to Bangladesh from Mumbai in SS 202, 304, 316, duplex and nickel alloy grades, shipped to Chattogram (Chittagong) with an EN 10204 3.1 mill certificate. Typical buyers are pharmaceutical and food equipment fabricators, shipyards, textile machinery builders and traders.

Quote round bars for Bangladesh All products for Bangladesh

01Round Bars in Bangladesh

What Bangladesh buyers use round bars for.

Bangladesh's demand comes from textile and garment machinery, pharmaceuticals, food and beverage processing, shipbuilding, power and construction.

Environment and grade choice

A monsoon climate with extreme humidity, seasonal flooding, and saline conditions across the southern delta. These are some of the harshest conditions for any stainless grade in South Asia. In humid, flood-prone and saline conditions we recommend 316 or duplex for anything exposed. SS 202 is for dry indoor use only.

Standards in Bangladesh

BDS national standards exist, but ASTM and BS are commonly cited on imported steel. State the standard and test certificate you need. Buyers in the region typically ask for welded tube, pipe, sheet and bar in 202 and 304 with a mill test certificate.

02SS 202 round bars

Round Bars: what to know before you order.

Round bar is solid feedstock, supplied in a stated delivery condition and tolerance class. In SS 202 it is bought for machined and turned parts in dry, indoor service, where the lower cost of 202 helps and the part will not see chlorides.

Bar is the feedstock for almost everything machined — shafts, valve internals, fasteners, fittings. What decides whether it is fit for the job is not the grade alone but the delivery condition and the tolerance class, which is why both are specified here up front rather than buried in a quotation.

Why buyers choose SS 202 here

Higher annealed yield strength than 304 gives a stiffer, harder-wearing part in light-duty mechanisms.
Cost per kilogram is lower than 304, which matters on high-volume turned parts where bar is the main cost.
Bar is available in several delivery conditions, so the same grade can serve rough-turned and ground-and-polished parts.

What to state in your enquiry

Shape: round, square, hexagonal or threaded
Diameter in mm and tolerance class (H7 to H10 published)
Delivery condition: export bright, peeled or turned, cold drawn, centreless ground and polished, black or forged
Length: 5 m to 6.5 m published, cut lengths to order
Bar ends: plain or bevelled
Marking: size, grade, specification and heat number

Published range

06 rows

Diameter: 10 mm300 mm
Shape: RoundSquareHexagonalThreaded
Tolerance: H7H8H9H10
Length: 5 m6.5 m
Customised length per requirement
Bar ends: PlainBevelled
Marking: SizeGradeSpecificationHeat number

All round bars: grades, standards and finishes →SS 202 composition and properties →

03Shipping

Shipping round bars to Bangladesh.

Documents

Mill Test Certificate (EN 10204 3.1)
Third Party Inspection (EN 10204 3.2) on request
Certificate of Origin
Commercial Invoice and Packing List
Bill of Lading / Airway Bill
Insurance certificate where required

Incoterms

Ports for Bangladesh

Chattogram (Chittagong): the country's principal seaport, handling most of Bangladesh's containerised trade

FAQ

Round Bars export to Bangladesh: questions answered

Which grade for pharmaceutical equipment in Bangladesh?: Pharmaceutical contact surfaces are normally 316L. We supply 316L with a mill test certificate; confirm the surface finish and traceability your customer requires.
How is cargo routed to Bangladesh?: By sea to Chattogram, from Nhava Sheva or Mumbai, with the Incoterm and port named in the quotation. Other routing can be discussed.
Is SS 202 round bar easy to machine?: Machinability is fair rather than good, and the grade work-hardens, so use sharp tooling, positive feeds and rigid setups. If the part is mostly machining, free-machining 303 may be the better grade where it is acceptable.
What diameters and tolerances do you supply?: Diameters from 10 mm to 300 mm are published, in tolerance classes H7, H8, H9 and H10, and in round, square, hexagonal and threaded shapes. Send the size and class and we confirm.
How is round bars shipped to Bangladesh?: By sea from Nhava Sheva (JNPT) or Mumbai to Chattogram (Chittagong). The quotation states the Incoterm and the named port, and quotations are typically returned the same working day. Call +91 79779 45282 or use the Request a Quote form.

More products for Bangladesh

Round Bars for other countries

Need round bars in Bangladesh?

State the grade, size, quantity, standard and destination port. We will confirm availability, documents and the Incoterm for Bangladesh.

Request a Quote Talk to Sales