310 is specified for oxidation resistance at temperature, not for wet corrosion service. The high chromium forms a stable scale up to around 1150 degrees C in continuous service, which makes it the standard grade for furnace internals, radiant tubes and kiln components. It is not a chloride-resistant grade and should not be substituted for 316.
Pitting resistance equivalent. Higher resists chlorides better.
Indexed to 304. Indicative, for specification triage.
Rajgranth Metal & Alloys manufactures, stocks, supplies and exports Stainless Steel 310 and 310S coils (UNS S31000 / S31008) from Mumbai. 25% chromium, 20% nickel. A heat-resisting grade, not a corrosion-resisting one. Rajgranth Metal & Alloys has been trading since 1980, is self-funded and debt-free, and despatches most orders from its Mumbai stockyard within two days.
310 is specified for oxidation resistance at temperature, not for wet corrosion service. The high chromium forms a stable scale up to around 1150 degrees C in continuous service, which makes it the standard grade for furnace internals, radiant tubes and kiln components. It is not a chloride-resistant grade and should not be substituted for 316.
Stainless Steel 310 and 310S is also designated UNS S31000 / S31008, EN 1.4845, AISI 310 / 310S, JIS SUS310S, GB S31008 and Werkstoff X8CrNi25-21. Quote the designation your specification uses and we will supply to it.
Oxidation resistance to approximately 1150 degrees C continuous, Resists sulphidation better than lower-chromium austenitics and Good strength retention at temperature. It is non-magnetic, with good weldability and fair machinability, and is used in continuous service in air up to about 1150 °C.
Embrittles through sigma phase formation on long exposure at 650–870 degrees C, Poor performance in aqueous chloride service despite high chromium and Significantly more expensive than 304. We state these plainly so the grade is chosen for the right service.
Our published range covers thickness 0.3 mm, 8 mm, width 100 mm, 2000 mm and coil id 508 mm, 610 mm. Standards include ASTM A240 / ASME SA-240, ASTM A480 and EN 10088-2. Finishes and conditions include No. 1, 2B, 2D, BA, No. 4, Hairline and Mirror.
furnace muffles, retorts and radiant tubes, kiln and heat treatment fixtures, cement plant components and fluidised bed combustors. Typical industries: power & energy, cement, chemical and plant engineering. We supply across India and export to markets in the Middle East, Africa, Europe, Asia, North America and South America.
Material is supplied with documentation, tested in house across 18 listed testing facilities, and covered by our ISO 9001:2015 quality management system. Rajgranth Metal & Alloys has been trading since 1980, is self-funded and debt-free, and despatches most orders from its Mumbai stockyard within two days.
Send the size, quantity and standard. We will confirm availability against stock and come back with price.
