Rajgranth Metal & Alloys exports seamless tubes to Oman from Mumbai in SS 202, 304, 316, duplex and nickel alloy grades, shipped to Sohar or Salalah with an EN 10204 3.1 mill certificate. Typical buyers are EPC and fabrication contractors, industrial-zone manufacturers and suppliers to the energy sector.
Oman's demand comes from oil and gas, petrochemical and industrial zones at Sohar and Duqm, construction, and desalination and power.
Hot desert interior and a humid coast on the Gulf of Oman and Arabian Sea. Coastal industrial zones carry chlorides, and the south has a monsoon humidity season. Industrial and coastal service needs 316L, duplex or nickel alloy. SS 202 is for indoor decorative use.
ASTM, ASME and API are the usual working standards. Operator requirements, for example for oil and gas fields, can be stricter. Buyers in the region typically specify ASTM or EN standards, expect EN 10204 3.1 certificates, and often require third-party inspection, which we arrange to EN 10204 3.2 on request.
Seamless tube is drawn without a weld seam to close tolerances on diameter and wall. Buyers choose it for precision, heat-exchange and instrument duty, and where a seam is not acceptable.
Tube is ordered to outside diameter and wall thickness rather than nominal bore, because the application usually cares about heat transfer or instrument fit rather than flow capacity. RGM holds seamless tube in small diameters down to 3.1 mm, which is the range most stockists will not carry.
mm — larger sizes to order
SWG, mm
Customised up to 12 m per requirement
All seamless tubes: grades, standards and finishes →SS 202 composition and properties →
State the grade, size, quantity, standard and destination port. We will confirm availability, documents and the Incoterm for Oman.
