Rajgranth Metal & Alloys exports seamless tubes to Sri Lanka from Mumbai in SS 202, 304, 316, duplex and nickel alloy grades, shipped to Colombo with an EN 10204 3.1 mill certificate. Buyers are food and tea-processing equipment makers, hotel and construction contractors, and traders.
Sri Lanka's demand comes from tea and food processing, apparel factories, construction and hospitality, and kitchenware.
A tropical island climate with warm, humid, salt-laden air everywhere. No site on the island is far from the sea, so chloride resistance is a routine consideration. Because of the coastal environment, 304 or 316 is the safer choice for most uses. SS 202 suits indoor decorative and furniture work.
SLS national standards apply, and ASTM and BS are commonly used for imported steel. Specify what your project requires. Buyers in the region typically ask for welded tube, pipe, sheet and bar in 202 and 304 with a mill test certificate.
Seamless tube is drawn without a weld seam to close tolerances on diameter and wall. Buyers choose it for precision, heat-exchange and instrument duty, and where a seam is not acceptable.
Tube is ordered to outside diameter and wall thickness rather than nominal bore, because the application usually cares about heat transfer or instrument fit rather than flow capacity. RGM holds seamless tube in small diameters down to 3.1 mm, which is the range most stockists will not carry.
mm — larger sizes to order
SWG, mm
Customised up to 12 m per requirement
All seamless tubes: grades, standards and finishes →SS 202 composition and properties →
State the grade, size, quantity, standard and destination port. We will confirm availability, documents and the Incoterm for Sri Lanka.
