Rajgranth Metal & Alloys exports seamless tubes to Bahrain from Mumbai in SS 202, 304, 316, duplex and nickel alloy grades, shipped to Khalifa Bin Salman Port with an EN 10204 3.1 mill certificate. Typical buyers are contractors and fabricators serving the refinery, smelter and construction sectors, and traders.
Bahrain's demand comes from aluminium smelting, oil refining, construction, and industrial and marine engineering.
A small, low-lying island nation with hot, very humid, salt-laden air. Almost nothing is far from the sea. Because chlorides are everywhere, 316L or better is advisable outdoors. SS 202 belongs in air-conditioned interiors only.
ASTM, ASME and BS standards are commonly used, with operator requirements on refining and smelter projects. Buyers in the region typically specify ASTM or EN standards, expect EN 10204 3.1 certificates, and often require third-party inspection, which we arrange to EN 10204 3.2 on request.
Seamless tube is drawn without a weld seam to close tolerances on diameter and wall. Buyers choose it for precision, heat-exchange and instrument duty, and where a seam is not acceptable.
Tube is ordered to outside diameter and wall thickness rather than nominal bore, because the application usually cares about heat transfer or instrument fit rather than flow capacity. RGM holds seamless tube in small diameters down to 3.1 mm, which is the range most stockists will not carry.
mm — larger sizes to order
SWG, mm
Customised up to 12 m per requirement
All seamless tubes: grades, standards and finishes →SS 202 composition and properties →
State the grade, size, quantity, standard and destination port. We will confirm availability, documents and the Incoterm for Bahrain.
