Rajgranth Metal & Alloys exports seamless tubes to Malaysia from Mumbai in SS 202, 304, 316, duplex and nickel alloy grades, shipped to Port Klang or Penang with an EN 10204 3.1 mill certificate. Typical buyers are process equipment builders, food and palm oil plant contractors, fabricators and distributors.
Malaysian demand comes from oil and gas, palm oil processing, food and beverage, chemicals, the electronics and semiconductor cluster around Penang, and construction.
A hot, humid, equatorial climate with coastal salt on both sides of the peninsula. Palm oil and food plants add washdown with cleaning chemicals, which is hard on lower grades. Food, palm oil and washdown service calls for 304L, 316L or duplex rather than 202. SS 202 is used for indoor furniture, decorative work and light fabrication.
Malaysian Standards (MS) exist, but projects commonly specify ASTM, ASME, BS or EN, and oil and gas work follows operator and API requirements. Buyers in the region typically order coils, sheets, welded pipe and tube in 202 and 304, polished or in 2B finish.
Seamless tube is drawn without a weld seam to close tolerances on diameter and wall. Buyers choose it for precision, heat-exchange and instrument duty, and where a seam is not acceptable.
Tube is ordered to outside diameter and wall thickness rather than nominal bore, because the application usually cares about heat transfer or instrument fit rather than flow capacity. RGM holds seamless tube in small diameters down to 3.1 mm, which is the range most stockists will not carry.
mm — larger sizes to order
SWG, mm
Customised up to 12 m per requirement
All seamless tubes: grades, standards and finishes →SS 202 composition and properties →
State the grade, size, quantity, standard and destination port. We will confirm availability, documents and the Incoterm for Malaysia.
