Rajgranth Metal & Alloys exports seamless tubes to United Arab Emirates from Mumbai in SS 202, 304, 316, duplex and nickel alloy grades, shipped to Jebel Ali or Sharjah with an EN 10204 3.1 mill certificate. Typical buyers are contractors, fabricators, trading houses and re-exporters, and project procurement teams.
The UAE's demand comes from construction and architecture, oil and gas (including ADNOC projects), water and desalination, food and hospitality, and re-export through Jebel Ali to the wider Gulf and Africa.
Extreme heat, high coastal humidity, salt-laden air and desert dust. Chloride exposure on the Gulf coast is severe for exposed metal, and indoor air-conditioned spaces are a completely different environment. Interior architectural work can use 202 or 304; exterior, marine and process work needs 316, duplex or nickel alloy because of coastal chlorides.
ASTM and ASME are widely used, with API and BS EN for oil and gas and building work. Operator specifications such as ADNOC's can add requirements beyond the commodity standard. Buyers in the region typically specify ASTM or EN standards, expect EN 10204 3.1 certificates, and often require third-party inspection, which we arrange to EN 10204 3.2 on request.
Seamless tube is drawn without a weld seam to close tolerances on diameter and wall. Buyers choose it for precision, heat-exchange and instrument duty, and where a seam is not acceptable.
Tube is ordered to outside diameter and wall thickness rather than nominal bore, because the application usually cares about heat transfer or instrument fit rather than flow capacity. RGM holds seamless tube in small diameters down to 3.1 mm, which is the range most stockists will not carry.
mm — larger sizes to order
SWG, mm
Customised up to 12 m per requirement
All seamless tubes: grades, standards and finishes →SS 202 composition and properties →
State the grade, size, quantity, standard and destination port. We will confirm availability, documents and the Incoterm for United Arab Emirates.
