Rajgranth Metal & Alloys exports seamless tubes to Egypt from Mumbai in SS 202, 304, 316, duplex and nickel alloy grades, shipped to Alexandria or Port Said with an EN 10204 3.1 mill certificate. Typical buyers are contractors, food and chemical plant builders, fabricators and traders.
Egypt's demand comes from construction and architecture, food processing, petrochemicals and fertilisers, power, and the Suez Canal economic zone.
A hot, dry interior and a humid Mediterranean and Red Sea coast. Alexandria and the canal cities carry marine chlorides while Cairo and the inland are dry. Inland, dry interior work suits 202 or 304; coastal and canal-zone sites need 316 or duplex.
Egyptian Standards (ES) apply domestically, with ASTM and EN commonly specified on imported steel. Buyers in the region typically ask for pipe, tube, sheet and bar in 202, 304 and 316, with documentation that clears customs and meets project requirements.
Seamless tube is drawn without a weld seam to close tolerances on diameter and wall. Buyers choose it for precision, heat-exchange and instrument duty, and where a seam is not acceptable.
Tube is ordered to outside diameter and wall thickness rather than nominal bore, because the application usually cares about heat transfer or instrument fit rather than flow capacity. RGM holds seamless tube in small diameters down to 3.1 mm, which is the range most stockists will not carry.
mm — larger sizes to order
SWG, mm
Customised up to 12 m per requirement
All seamless tubes: grades, standards and finishes →SS 202 composition and properties →
State the grade, size, quantity, standard and destination port. We will confirm availability, documents and the Incoterm for Egypt.
