Rajgranth Metal & Alloys exports welded pipes to Egypt from Mumbai in SS 202, 304, 316, duplex and nickel alloy grades, shipped to Alexandria or Port Said with an EN 10204 3.1 mill certificate. Typical buyers are contractors, food and chemical plant builders, fabricators and traders.
Egypt's demand comes from construction and architecture, food processing, petrochemicals and fertilisers, power, and the Suez Canal economic zone.
A hot, dry interior and a humid Mediterranean and Red Sea coast. Alexandria and the canal cities carry marine chlorides while Cairo and the inland are dry. Inland, dry interior work suits 202 or 304; coastal and canal-zone sites need 316 or duplex.
Egyptian Standards (ES) apply domestically, with ASTM and EN commonly specified on imported steel. Buyers in the region typically ask for pipe, tube, sheet and bar in 202, 304 and 316, with documentation that clears customs and meets project requirements.
Welded pipe is formed from flat strip, seam-welded and then usually annealed or dressed. It is the economical route for larger diameters and for decorative and structural pipe, and it is the form in which SS 202 is most often bought.
Welded pipe is formed from strip and seam-welded, then solution annealed and pickled. For ambient and moderate-pressure duty — water, structural, food and general process lines — it delivers the same corrosion performance as seamless at materially lower cost, and is available in larger diameters.
mm
SWG, mm
Customised up to 12 m per requirement
All welded pipes: grades, standards and finishes →SS 202 composition and properties →
State the grade, size, quantity, standard and destination port. We will confirm availability, documents and the Incoterm for Egypt.
