Skip to content
Rajgranth Metal & AlloysRAJGRANTH
Export to Indonesia · Welded Pipes

Stainless steel welded pipes supplier and exporter in Indonesia.

Rajgranth Metal & Alloys exports welded pipes to Indonesia from Mumbai in SS 202, 304, 316, duplex and nickel alloy grades, shipped to Jakarta (Tanjung Priok) or Surabaya with an EN 10204 3.1 mill certificate. Buyers include fabricators, equipment builders, project contractors and traders who import specific forms, sizes and alloys.

01Welded Pipes in Indonesia

What Indonesia buyers use welded pipes for.

Indonesia's stainless demand comes from nickel mining and processing, oil and gas, palm oil and food processing, construction, and kitchenware and appliance makers. The country also has a large domestic stainless industry of its own.

Environment and grade choice

An archipelago with a hot, humid tropical climate and salt-laden air at every coast. Chloride exposure is the norm rather than the exception, which matters when choosing between 202, 304 and 316. Because the country already produces stainless steel, buyers often import where a particular size, finish, nickel alloy or small lot is hard to find locally. Send the requirement and we confirm what we can supply.

Standards in Indonesia

SNI is the national standard system, and imported material is commonly specified to ASTM or JIS. Give us the standard your project or customs entry requires. Buyers in the region typically order coils, sheets, welded pipe and tube in 202 and 304, polished or in 2B finish.

02SS 202 welded pipes

Welded Pipes: what to know before you order.

Welded pipe is formed from flat strip, seam-welded and then usually annealed or dressed. It is the economical route for larger diameters and for decorative and structural pipe, and it is the form in which SS 202 is most often bought.

Welded pipe is formed from strip and seam-welded, then solution annealed and pickled. For ambient and moderate-pressure duty — water, structural, food and general process lines — it delivers the same corrosion performance as seamless at materially lower cost, and is available in larger diameters.

Why buyers choose SS 202 here

  • On long runs and large diameters the weight of metal dominates the bill, so the lower price of 202 against 304 is felt most in pipe.
  • The higher annealed yield strength of 202 can allow a lighter wall in some structural designs, which is a design decision to be checked by the engineer, not assumed.
  • Pipe in 202 takes a bright polish, which suits exposed handrail, balustrade and display framing indoors.

What to state in your enquiry

  • Nominal bore and schedule, or outside diameter and wall thickness
  • Welded or seamless
  • Length: the published stock range is 5 m to 6.5 m, with longer lengths to order
  • End condition: plain or bevelled
  • Surface: mill finish, annealed and pickled, or polished to a stated grit
  • The standard and test certificate required

Published range

05 rows
Outside diameter
10.313.717.121.326.733.442.248.360.373.088.9114.3141.3168.3219.1273.1323.9355.6406.4457.2508.0609.6

mm

Schedule
SCH 5SCH 10SCH 20SCH 40SCH 80SCH 120SCH 160SCH XXS
Wall thickness
0.710.911.211.622.032.52.83.03.254.05.06.08.0

SWG, mm

Length
5 m6.5 m

Customised up to 12 m per requirement

Pipe ends
PlainBevelled

All welded pipes: grades, standards and finishes →SS 202 composition and properties →

03Shipping

Shipping welded pipes to Indonesia.

Documents

06
  • Mill Test Certificate (EN 10204 3.1)
  • Third Party Inspection (EN 10204 3.2) on request
  • Certificate of Origin
  • Commercial Invoice and Packing List
  • Bill of Lading / Airway Bill
  • Insurance certificate where required

Incoterms

05
  • FOB
  • CFR
  • CIF
  • EXW
  • DAP

Ports for Indonesia

02
  • Jakarta (Tanjung Priok): Indonesia's busiest container port, serving Jakarta and the industrial areas of West Java
  • Surabaya: the main port for East Java and the eastern archipelago

FAQ

05

Welded Pipes export to Indonesia: questions answered

Why import stainless steel into a country that makes its own?
Local supply covers the common flat products in volume. Specific sizes, finishes, seamless pipe, bar and nickel alloys are where buyers look further, so send the exact requirement.
Which port is best for goods bound for Java?
Jakarta Tanjung Priok serves West Java and the capital region; Surabaya serves East Java. We quote to whichever is nearer your site.
Is SS 202 pipe suitable for water or chemical service?
202 suits dry, indoor and mildly humid duty. It resists corrosion less well than 304 and 316, so it is not recommended for chloride-bearing water, coastal exposure or chemical process lines. For those, move to 316, duplex or a nickel alloy.
Should I buy welded or seamless 202 pipe?
Welded pipe is the usual choice for decorative and structural use, and is more economical. Seamless pipe has no weld seam and is chosen where a seam is unwanted or the design code asks for it. We list 202 in both; tell us the duty and we will suggest the right one.
How is welded pipes shipped to Indonesia?
By sea from Nhava Sheva (JNPT) or Mumbai to Jakarta (Tanjung Priok) or Surabaya. The quotation states the Incoterm and the named port, and quotations are typically returned the same working day. Call +91 79779 45282 or use the Request a Quote form.

Need welded pipes in Indonesia?

State the grade, size, quantity, standard and destination port. We will confirm availability, documents and the Incoterm for Indonesia.

CallWhatsAppGet a Quote