Skip to content
Rajgranth Metal & AlloysRAJGRANTH
Export to United Arab Emirates · Welded Pipes

Stainless steel welded pipes supplier and exporter in United Arab Emirates.

Rajgranth Metal & Alloys exports welded pipes to United Arab Emirates from Mumbai in SS 202, 304, 316, duplex and nickel alloy grades, shipped to Jebel Ali or Sharjah with an EN 10204 3.1 mill certificate. Typical buyers are contractors, fabricators, trading houses and re-exporters, and project procurement teams.

01Welded Pipes in United Arab Emirates

What United Arab Emirates buyers use welded pipes for.

The UAE's demand comes from construction and architecture, oil and gas (including ADNOC projects), water and desalination, food and hospitality, and re-export through Jebel Ali to the wider Gulf and Africa.

Environment and grade choice

Extreme heat, high coastal humidity, salt-laden air and desert dust. Chloride exposure on the Gulf coast is severe for exposed metal, and indoor air-conditioned spaces are a completely different environment. Interior architectural work can use 202 or 304; exterior, marine and process work needs 316, duplex or nickel alloy because of coastal chlorides.

Standards in United Arab Emirates

ASTM and ASME are widely used, with API and BS EN for oil and gas and building work. Operator specifications such as ADNOC's can add requirements beyond the commodity standard. Buyers in the region typically specify ASTM or EN standards, expect EN 10204 3.1 certificates, and often require third-party inspection, which we arrange to EN 10204 3.2 on request.

02SS 202 welded pipes

Welded Pipes: what to know before you order.

Welded pipe is formed from flat strip, seam-welded and then usually annealed or dressed. It is the economical route for larger diameters and for decorative and structural pipe, and it is the form in which SS 202 is most often bought.

Welded pipe is formed from strip and seam-welded, then solution annealed and pickled. For ambient and moderate-pressure duty — water, structural, food and general process lines — it delivers the same corrosion performance as seamless at materially lower cost, and is available in larger diameters.

Why buyers choose SS 202 here

  • On long runs and large diameters the weight of metal dominates the bill, so the lower price of 202 against 304 is felt most in pipe.
  • The higher annealed yield strength of 202 can allow a lighter wall in some structural designs, which is a design decision to be checked by the engineer, not assumed.
  • Pipe in 202 takes a bright polish, which suits exposed handrail, balustrade and display framing indoors.

What to state in your enquiry

  • Nominal bore and schedule, or outside diameter and wall thickness
  • Welded or seamless
  • Length: the published stock range is 5 m to 6.5 m, with longer lengths to order
  • End condition: plain or bevelled
  • Surface: mill finish, annealed and pickled, or polished to a stated grit
  • The standard and test certificate required

Published range

05 rows
Outside diameter
10.313.717.121.326.733.442.248.360.373.088.9114.3141.3168.3219.1273.1323.9355.6406.4457.2508.0609.6

mm

Schedule
SCH 5SCH 10SCH 20SCH 40SCH 80SCH 120SCH 160SCH XXS
Wall thickness
0.710.911.211.622.032.52.83.03.254.05.06.08.0

SWG, mm

Length
5 m6.5 m

Customised up to 12 m per requirement

Pipe ends
PlainBevelled

All welded pipes: grades, standards and finishes →SS 202 composition and properties →

03Shipping

Shipping welded pipes to United Arab Emirates.

Documents

06
  • Mill Test Certificate (EN 10204 3.1)
  • Third Party Inspection (EN 10204 3.2) on request
  • Certificate of Origin
  • Commercial Invoice and Packing List
  • Bill of Lading / Airway Bill
  • Insurance certificate where required

Incoterms

05
  • FOB
  • CFR
  • CIF
  • EXW
  • DAP

Ports for United Arab Emirates

02
  • Jebel Ali: the UAE's largest port and a regional hub, in Dubai
  • Sharjah: the Sharjah emirate's port, used for cargo to the northern emirates

FAQ

05

Welded Pipes export to United Arab Emirates: questions answered

Do you supply to oil and gas projects in the UAE?
We supply stainless steel and nickel alloy in the standards listed on this site. Where an operator specification applies, send it with the enquiry and we confirm what we can meet.
Can UAE buyers re-export material?
Many do. State the final destination in your enquiry so the documents and certificates can be prepared accordingly.
Is SS 202 pipe suitable for water or chemical service?
202 suits dry, indoor and mildly humid duty. It resists corrosion less well than 304 and 316, so it is not recommended for chloride-bearing water, coastal exposure or chemical process lines. For those, move to 316, duplex or a nickel alloy.
Should I buy welded or seamless 202 pipe?
Welded pipe is the usual choice for decorative and structural use, and is more economical. Seamless pipe has no weld seam and is chosen where a seam is unwanted or the design code asks for it. We list 202 in both; tell us the duty and we will suggest the right one.
How is welded pipes shipped to United Arab Emirates?
By sea from Nhava Sheva (JNPT) or Mumbai to Jebel Ali or Sharjah. The quotation states the Incoterm and the named port, and quotations are typically returned the same working day. Call +91 79779 45282 or use the Request a Quote form.

Need welded pipes in United Arab Emirates?

State the grade, size, quantity, standard and destination port. We will confirm availability, documents and the Incoterm for United Arab Emirates.

CallWhatsAppGet a Quote