Rajgranth Metal & Alloys exports welded pipes to Bangladesh from Mumbai in SS 202, 304, 316, duplex and nickel alloy grades, shipped to Chattogram (Chittagong) with an EN 10204 3.1 mill certificate. Typical buyers are pharmaceutical and food equipment fabricators, shipyards, textile machinery builders and traders.
Bangladesh's demand comes from textile and garment machinery, pharmaceuticals, food and beverage processing, shipbuilding, power and construction.
A monsoon climate with extreme humidity, seasonal flooding, and saline conditions across the southern delta. These are some of the harshest conditions for any stainless grade in South Asia. In humid, flood-prone and saline conditions we recommend 316 or duplex for anything exposed. SS 202 is for dry indoor use only.
BDS national standards exist, but ASTM and BS are commonly cited on imported steel. State the standard and test certificate you need. Buyers in the region typically ask for welded tube, pipe, sheet and bar in 202 and 304 with a mill test certificate.
Welded pipe is formed from flat strip, seam-welded and then usually annealed or dressed. It is the economical route for larger diameters and for decorative and structural pipe, and it is the form in which SS 202 is most often bought.
Welded pipe is formed from strip and seam-welded, then solution annealed and pickled. For ambient and moderate-pressure duty — water, structural, food and general process lines — it delivers the same corrosion performance as seamless at materially lower cost, and is available in larger diameters.
mm
SWG, mm
Customised up to 12 m per requirement
All welded pipes: grades, standards and finishes →SS 202 composition and properties →
State the grade, size, quantity, standard and destination port. We will confirm availability, documents and the Incoterm for Bangladesh.
